4-Pin Male Crimp Connector for Spa Control Boards - PPS-10506

4-Pin Male Crimp Connector for Spa Control Boards

This 4-pin male connector is a replacement part for certain spa and hot tub control systems, where it is used for connections between electronic boards. It is a crimp-type connector with a 2.5 mm pitch, designed for cable mounting.

Because connectors look alike but differ in pin count and pitch, the specifications below are worth checking against your existing connector before you order.

Specifications of the 4-pin male connector

The connector is supplied as a 4-pin male type with a crimp connection. The key technical data is:

• Type: 4-pin male connector (crimp type)
• Pitch: 2.5 mm
• Rated current: up to 3 A
• Maximum voltage: 250 V AC/DC
• Mounting: cable (crimp connection)

These values describe the connector itself. Make sure they suit the board connection you are repairing.

Where this spa connector is used

This part is used in certain spa control systems, particularly for linking electronic boards together. It is not tied to one named control system in the information we hold, so it is important to compare it with the connector you are replacing rather than assuming it will fit.

How to choose the right connector

Before ordering a replacement hot tub connector, compare these points with the damaged or missing part:

• Number of pins: this connector has 4.
• Gender: this is a male connector, so the mating side needs to be female.
• Pitch: the spacing between pins is 2.5 mm.
• Connection method: this is a crimp connector, fitted to a cable, not a solder or board-mounted type.
• Electrical limits: up to 3 A and 250 V AC/DC.

If any of these differ from your current connector, this part is not the right choice.

Fitting and cable connection

The connector is mounted on a cable using a crimp connection. Crimping needs a suitable crimp tool and contacts that match the connector, so check what you need before starting work. Always isolate the spa from the power supply before opening the control system or handling any board connections.

If you are unsure about working on the electrical side of your spa, ask a qualified technician to carry out the replacement.