Aller au contenu

PSH

PSH has been building pool pumps in Spain since 1910, which makes it one of Europe’s oldest names in pool circulation — from domestic units to the large pumps behind public pools, wave pools and aquatic parks. At PoolParthub.com you will find exploded views and original spare parts for the full range, from Micro and Mini up to Giant and the FDN series, plus components for PSH laminated filters.

PSH pool pumps, filters and spare parts

PSH has been building pumps in Spain since 1910, which makes it one of the oldest pump manufacturers still active in the European pool industry. The range runs from compact circulation pumps for private pools to the large cast-iron units that move water in public pools, wave pools and aquatic parks. Across that whole range the design principle is the same: a pump that can be opened, serviced and refitted with new internals lasts considerably longer than one that has to be replaced as a whole.

Here you will find exploded views and original spare parts for the PSH pump and filter range. Each exploded view shows the numbered positions of one specific model, so you can identify the component you need before ordering rather than comparing photographs and hoping for a match.

PSH pool pump ranges

The pump range is organised by flow rate and duty, from small private installations to plant rooms that run continuously through the season:

  • Micro and Mini — compact circulation pumps for small private pools and spas
  • ND.1, ND.2, Maxi and AFN — the mid-range pumps found in most residential filtration systems
  • Giant and Great Giant — higher flow units for large private and semi-commercial pools
  • FDN series (DN-1500 and DN-3000) — large-diameter pumps for public and commercial installations
  • CLEO, Aquatic Park and New Contra — units built for wave pools, water attractions and counter-current swimming

The matching pre-filters are part of the same range, including the cast-iron pre-filter and the Giant-series housing. A pre-filter basket that no longer seats properly is one of the most common causes of a pump losing prime, so the lid gaskets and baskets are worth checking before suspecting the pump itself.

PSH laminated filters and filtration kits

PSH laminated filters are supplied in five tank sizes — LS450, LS550, LS650, LS750 and LS900 — and most spare parts are size-specific rather than universal. The smaller tanks use 1½″ connections, the LS750 and LS900 use 2″, and ordering the wrong size is the single most frequent mistake on these filters.

  • Top-mount multiport selector valves in 1½″ for LS450 to LS650 and 2″ for LS750 and LS900
  • Lateral collector arms and bottom strainers in 110, 115, 175 and 225 mm
  • Double gaskets, three-piece union fittings and elbow and coupling assemblies per tank size
  • Pressure gauges, sight glasses, drain plugs and the filter clamp with its fixing hardware

The complete PSH filtration kit — tank, pump, valve and hoses as one assembly — is covered as well, down to the pressure gauge and the union sleeve with sight glass.

Finding the right PSH spare part

Most PSH components can be identified without removing anything from the installation:

  • Start from the exploded view of your model and note the position number of the part you need
  • Read the tank size from the filter label, because valves, laterals and gaskets differ between LS450 and LS900
  • If the label has faded, measure a lateral or gasket before ordering — the diameters are close enough together to be easy to mix up
  • For pumps, the model name on the housing determines the impeller, mechanical seal and diffuser, so note it before ordering internals

PSH at PoolParthub.com

Here we list PSH pumps, filters and components with their exploded views, so a repair can be planned from the drawing instead of from guesswork. The focus is on the parts that genuinely wear — seals, gaskets, strainers, valves and impellers — because those are what decide whether an installation keeps running or has to be rebuilt.

Whether you are maintaining a single residential pump or keeping a public installation with FDN-series units in service, the PSH range is built to be repaired. The exploded views make it possible to order exactly the component that failed, and nothing beyond it.