Nettoyage
Pool cleaning tools, brushes and vacuum heads
Keeping a pool clear is mostly mechanical work: brushing the walls and floor, lifting leaves off the surface before they sink, vacuuming what has settled, and wiping the greasy tidemark that forms at the waterline. Here you will find the hand tools that do that work, from stainless steel algae brushes and weighted vacuum heads to leaf skimmers, disposable skimmer bags, waterline erasers and battery-powered vacuums for spas and steps.
What belongs in a basic maintenance kit
Most pools are maintained with a small, fixed set of tools that attach to a telescopic pole. Before ordering, check which pole fitting your existing handle uses, because heads, brushes and nets are supplied without a pole unless the product name says otherwise.
- Pinceaux – wall and floor brushes such as the 45 cm model with aluminium backing or the Norsup wall brush 46 cm, plus narrow stainless steel algae brushes in 18″ and 5″ widths for stubborn spots and corners.
- Vacuum heads – weighted heads that connect to a vacuum hose and are pushed slowly along the floor, including heavy, triangular and flexible versions.
- Surface tools – flat leaf skimmers for floating debris and deep-bag leaf nets for scooping settled leaves from the bottom.
- Waterline products – eraser sponges and handled erasers that remove the oily line without chemicals.
- Consumables – disposable skimmer pre-filter bags and maintenance sprays for metal fittings, handrails and ladders.
Brushes for concrete, tiles and liners
The bristle material matters more than the width. Stainless steel brushes, such as the 18″ and 5″ algae brushes, are intended for concrete, gunite and tiled pools where algae grips into a rough or porous surface. They should not be used on liner, vinyl or painted finishes, which are easily scratched; those surfaces are better served by nylon-bristled brushes such as the 45 cm brush with aluminium backing or the 46 cm wall brush.
Width is a trade-off between speed and control. A 45 to 46 cm brush covers walls and the shallow floor quickly, while a 5″ head reaches behind ladders, around lights, into steps and along the junction between wall and floor where debris collects. Many pool owners keep both.
Vacuum heads and cordless vacuums
Manual vacuum heads differ in the way they sit on the surface and in how they connect. Heavy models like the grey heavy head stay planted on the floor and are forgiving on uneven concrete; the triangular deluxe head works along corners and curved walls; the Norsup Trivac and flexible single-flex heads are designed to follow contours. Note the hose connection stated in the product name — the single-flex head listed with a Ø50mm pipe-mount is a different fitting from a standard swivel hose cuff, so compare it with the hose you already own before ordering.
For spas, hot tubs, steps and small above-ground pools, battery vacuums remove the need for a hose and pump altogether. The Pool Blaster Volt FX-2 and the Volt FX-4 Li are cordless units with their own suction and filter; the FX-4 Li is specified with a 45 minute runtime, which is typically enough for a spa or a series of localised clean-ups rather than a full large pool.
Nets, skimmer bags and seasonal items
Surface debris is cheaper to remove than to filter. A flat leaf skimmer, including the version supplied with a 122 cm pole, lifts leaves and insects before they break down and raise chlorine demand, while a deep-bag leaf net with a reinforced TPR edge holds a larger load and can be dragged across the floor without damaging the finish. Disposable pre-filter bags that sit inside the skimmer basket catch fine debris, pollen and hair, keeping the pump strainer and filter cleaner between backwashes; these come in multi-packs and are replaced rather than cleaned.
Also stocked here are waterline erasers in sponge form and with an ergonomic handle, a stainless steel maintenance spray in a 0.4 litre bottle for ladders, rails and fixings, and wintering floats measuring 52 × 490 × 235 mm that are placed in the water over the closed season to absorb the pressure of ice.
Cleaning at PoolParthub.com
Here we list hand tools, vacuum heads, nets, brushes, waterline erasers, skimmer consumables and cordless vacuums from Flotide, Norsup, Pool’Gom, Net’Skim, Water Tech and Pool Blaster, alongside unbranded maintenance items. The selection is built around the parts that wear out or get lost: bristles that flatten, nets that tear, sponges that are used up and bags that are thrown away after use.
If you are replacing a single item, match the width and the pole or hose fitting of what you already have; if you are equipping a new pool, start with one wall brush, one vacuum head, a leaf skimmer and a pole, then add the narrower algae brush and waterline products as the surface and the season demand.