Aller au contenu

Écumoires

Skimmers and skimmer spare parts

The skimmer is the part of a pool that works hardest and is noticed least. Water is drawn through the throat at the waterline, leaves, insects and sun cream are caught in the basket, and the pump keeps pulling. Because it sits at the surface, the skimmer takes the full load of UV light, chlorinated water, frost and the occasional knock from a telescopic pole. Lids crack, weir flaps lose their float, baskets split at the handle and flat gaskets harden until the body weeps behind the liner. None of that means the skimmer itself has to be replaced.

Here we list complete skimmers alongside exploded views, so that a single component can be identified by its position on the drawing and ordered on its own. The range includes the Écumoire à ligne d'eau haute, large, le Flotide/MEGA Skimmer, Type Standard et le Aquareva BWT Skimmer SL-119-M-MR in white.

How an exploded view helps you order

A skimmer looks like one moulded unit, but it is an assembly. The exploded view separates it into numbered items so you can point at the one that has failed instead of describing it. That matters because lids, collars and baskets are rarely interchangeable between makes or even between series from the same maker: the throat opening, the screw pattern and the basket seat all differ.

  • Start with the make and series — look for a name or code moulded into the underside of the lid, the collar or the body.
  • Note the position number — the item you need on the drawing, rather than a generic description such as “the lid”.
  • Measure before ordering — the outside diameter of a round lid, the length and width of a rectangular one, and the depth and diameter of a basket.
  • Check the throat — wide-throat models such as the High Waterline Skimmer Wide take a different weir flap from a standard throat.
  • Count the fixings — the number and spacing of screws in the collar or faceplate is a quick way to confirm a match.

Parts that wear and why

Some components are consumables in all but name. Replacing them early is far cheaper than dealing with the consequences.

  • Lid and collar — brittle from UV exposure, often cracked by being stood on or driven over on a deck.
  • Panier filtrant — splits at the rim or the handle; a broken basket lets debris straight into the pump and the filter.
  • Weir flap — the hinged door that holds the surface film against the throat. When its float becomes waterlogged or the hinge pins wear, skimming efficiency drops noticeably.
  • Gaskets and flat seals — between body and faceplate, around the inlet and under the collar. Hardened seals are the usual cause of damp behind a skimmer.
  • Equaliser and suction fittings — threaded inserts and plugs that can be cross-threaded or over-tightened.
  • Vacuum plate and screws — stainless fixings seize or shear; the plate itself cracks around the holes.

Choosing a replacement skimmer

When the body itself is damaged, the choice is usually dictated by the pool rather than by preference. Liner pools, panel pools, concrete pools and one-piece shells each demand a different mounting arrangement, and a high waterline model is designed for a different relationship between coping and water level than a standard unit. The colour matters too, which is why white units such as the Aquareva BWT SL-119-M-MR are listed by finish — a replacement that matches the existing trim and coping looks far better than a near miss.

Before committing, measure the opening in the wall or panel, note the pipe diameter and the number of connections, and photograph the existing installation from both sides where you can reach it. That record saves a second trip into the plant room.

Skimmers at PoolParthub.com

Here you will find complete skimmers together with the exploded views that break them down into orderable items — lids, collars, baskets, weir flaps, seals and fixings — for wide-throat, high waterline and standard types, including Flotide/MEGA and Aquareva BWT units.

Spare parts for pools are kept in service far longer than most equipment, so listings are built around identification rather than guesswork. If a drawing and a measurement point to the same part, you can order with confidence that the single component you need will fit the skimmer already in the wall.