Baracuda
Baracuda spare parts for pumps, valves and filtration
Baracuda is a name most pool owners recognise from cleaning and circulation equipment, and the range listed here covers the parts that keep that equipment running: pump internals, motor components, seals and valve bodies. Rather than complete units, the focus is on the individual items that wear, leak or break after several seasons of continuous duty, so a working pump does not have to be replaced because of one failed bearing or a perished mechanical seal.
Here you will find parts grouped around the Aquantis pump family in its various power ratings, together with multiport valve components for sand filter installations. Each item carries its own reference code, which makes it possible to order the exact component shown on an exploded parts drawing instead of guessing from a photograph.
Aquantis pump parts by power rating
The Aquantis pumps appear in several outputs, and the internals are not interchangeable between them. An impeller cut for a 0.33HP motor will not deliver the same flow or fit the same volute as one made for 0.60HP, so the rating stamped on the motor plate is the first thing to confirm before ordering. Parts listed for this range include:
- Impellers and rotors for 0.24HP, 0.33HP, 0.42HP, 0.50HP and 0.60HP versions, including the 0.60HP rotor shown as position 22 on the parts diagram.
- Diffusers such as the 0.33HP pump diffuser at position 15, which sits behind the impeller and directs flow into the discharge.
- Mechanical seals and waterproof rings that separate the wet end from the motor shaft and are the usual cause of a pump that drips from the centre.
- Motor ball bearings and shaft circlips for the 0.60HP motor, the parts most often behind a rising noise level or a shaft that feels rough when turned by hand.
- Cooling fans and fan covers, including items referenced against pump code 77806, which protect the motor from overheating in warm plant rooms.
- Front end covers, pump supports and switch seal washers, covering the housing and mounting side of the unit as well as the electrical entry.
Multiport valves and filter-side components
Alongside the pump parts, the range includes multiport valve bodies such as the 2″ bayonet three-position new generation valve. A bayonet-mount valve clamps onto the filter neck rather than bolting through a flange, so when replacing one it is essential to match the mounting type, the port size and the number of positions. A three-position valve offers a reduced set of functions compared with a six-way head, and fitting the wrong type will leave a backwash or rinse step unavailable.
Before ordering any valve component, check the union or port diameter, look at how the head attaches to the tank, and note whether the existing unit is an older or newer generation casting. Spider gaskets, handles and keys differ between generations even when the external dimensions look similar.
How to identify the part you need
Most Baracuda parts carry a reference beginning RV3791R, followed by a sequence number that is unique to that component, while valve parts use codes such as 28512R0101. Working from these codes is far more reliable than describing a part by appearance.
- Start with the unit — find the model name and power rating on the motor label or the moulded housing.
- Use the exploded drawing — position numbers like 15 or 22 tie directly to a single item in the parts list.
- Measure before ordering seals — note the inner and outer diameter and the height of any ring or washer, and compare the shaft diameter where a mechanical seal sits.
- Check both bearings — motors use bearings at each end, and these are not always the same size; replacing both at once avoids a second strip-down.
Baracuda at PoolParthub.com
Here we list the Baracuda parts that pool owners and service technicians actually ask for: impellers, diffusers, seals, bearings, fans, covers, supports and valve bodies, across the Aquantis power ratings and the multiport fittings used with sand filters. Every item is listed with its manufacturer reference so the right component can be matched to an existing installation.
Stocking parts rather than whole assemblies keeps older pumps and filter systems in service for longer, which is usually the cheaper and quieter route to a pool that circulates properly again. If a reference is known, searching on the code is the fastest way to reach the correct item.