Zodiac - pH/ORP eXPERT 30 Salt Chlorinator – 30 g/h - 74196

Zodiac – pH/ORP eXPERT 30 Salt Chlorinator – 30 g/h

The Zodiac pH/ORP eXPERT 30 is a salt chlorinator with automatic pH and ORP regulation. It produces 30 g/h of chlorine for pools up to 140 m³, with a salt level of 4 g/L and 184 W power consumption.

Cum funcționează electroliza sării

The chlorinator consists of an electrolysis cell containing electrodes and a control box. As the salty pool water passes through the cell, the current from the electrodes turns chloride ions from the pool salt into chlorine, which dissolves in the water and disinfects it.

The chlorine then recombines into salt in the pool, so the process repeats as long as the system runs. The recommended salt level is 4-10 g/L.

Automatic pH and ORP regulation

The pH/ORP eXPERT manages water balance and chlorination together. It measures the pH of the water and, when needed, injects corrective product using its pH dosing pump. It also regulates chlorination automatically by ORP (Redox) measurement.

The pH sensor and the ORP sensor are both made of high-quality glass, and the ORP sensor has a special gold tip for salt water. Indicator lights show when the pH or ORP values are outside the normal range.

Control și conectivitate

The large backlit touchscreen with an LCD uses big characters, so the status of your pool can be checked at a glance. The unit is designed to be set up and adjusted quickly.

• Operating modes: Normal, Cover Mode and Boost Mode
• Remote control with a smartphone app when linked to the Connect & Go pool automation system
• Water temperature and salinity shown on the screen, with indicator lights for water that is too cold or salinity that is too low or too high

Instrucțiuni de instalare

Installation and electrical connection must be carried out by a qualified installer, following the manufacturer’s instructions and local regulations. The unit runs on a 230 V / 50-60 Hz supply, and the cell connection is Ø 63 mm. Matching PVC reducers are needed for smaller pipe diameters.

The cell goes on the return line as the last element before the pool, after the filtration, any sensors and any heating. The flow detector is fitted just before the cell, and a mechanical flow switch stops production if there is not enough water. The control box belongs in a ventilated, dry, frost-free technical room.

Maintenance and salt

The electrodes clean themselves by reversing polarity, which is adjustable, so routine upkeep is minimal. The cell is built to be ultra-resistant for long-lasting water treatment.

Add salt to the pool water, never directly into the skimmers, and start the unit only once the salt has fully dissolved. The pH and ORP probes need calibrating and regular maintenance, and any work beyond simple user care should be left to a qualified professional.