Pahlén Nicht leckende Flansch, Wasserstandsregelung 112505

Pahlén Nicht leckende Flansch, Wasserstandsregelung 112505

The Pahlén non leak flange 112505 is a spare part for Pahlén water level control installations. It forms the sealed wall penetration that holds the level control fitting in place, so the connection through the pool or tank wall stays watertight. It is ordered as an individual component, typically as a replacement or when building up a level control assembly.

Was es ist

This is a flange for water level control, supplied under Pahlén article number 112505. Its purpose is to provide a leak-free mounting point where a level control fitting passes through a wall. It is a mechanical component with no electrical function of its own.

Wo es sich befindet

Water level control is normally installed in a surge tank, balance tank or pool wall, where the level is monitored and make-up water is added automatically. The non leak flange belongs to that part of the installation, at the point where the fitting penetrates the wall. Keeping this penetration tight is what prevents seepage around the level control.

Ordering as a spare

Order by article number 112505 to be sure of getting the correct Pahlén part. Check the existing level control installation before ordering, since the flange is one element of a larger assembly. Any sealing and fixing components should be inspected at the same time.