Maytronics Dolphin Active Classic CB Laufradabdeckung 2010 CLS8 – M96330087

Maytronics Dolphin Active Classic CB impeller cover 2010 CLS8

This is the genuine Maytronics replacement impeller cover for the Dolphin Active Classic CB robotic pool cleaner, designed for the 2010-series CLS8 motor configuration. The impeller cover seats flush over the impeller assembly within the motor unit housing, forming a precise hydraulic seal that channels water flow through the impeller and into the filtration circuit. Without an intact cover, suction efficiency drops immediately and debris pick-up performance is compromised.

Function and role in the motor unit

The impeller cover is the protective and flow-directing lid that encloses the spinning impeller inside the 2010-series motor unit. It is secured to the cover assembly with screws and must sit perfectly flush to maintain the pressure differential that drives water through the cleaner. Any crack, warp, or fracture in this cover allows water to bypass the impeller, directly reducing the vacuum force the robot relies on to lift debris from the pool floor and walls.

Kompatible Dolphin-Modelle

This cover is designed for the Maytronics Dolphin Active Classic CB and is specified for the 2010 motor platform carrying the CLS8 designation. The 2010-series motor unit is used across several Dolphin CB-platform models; if your robot’s motor unit bears the 2010 or CLS8 reference, verify the part number M96330087 against your service documentation before ordering, as closely related CLS variants may use different cover geometries.

Symptome, die darauf hindeuten, dass ein Austausch erforderlich ist

Replace the impeller cover when you notice a significant and unexplained drop in suction power, water escaping from the motor unit area, visible cracking or chipping on the cover surface, or the robot failing to pick up debris it would previously collect. A damaged cover can also cause the impeller to run in an unloaded state, increasing wear on the motor bearings over time.

Warum Originalteile von Maytronics so wichtig sind

Aftermarket impeller covers are frequently moulded to looser tolerances, meaning gaps form between the cover and the motor unit housing. Even a small gap is enough to disrupt the hydraulic seal and degrade suction. Genuine Maytronics parts are manufactured to the exact geometry of the original, ensuring the cover sits flush, the screws engage their threads correctly, and the impeller operates at its designed efficiency from the moment of installation.