Hydrospa - Black Oval Spa Headrest Pillow for Hydrospa and Premium Leisure Spas - 3020

Hydrospa – Black Oval Spa Headrest Pillow for Hydrospa and Premium Leisure Spas

The Hydrospa oval pillow, part number 3020, is a black replacement spa headrest for several Hydrospa models and Premium Leisure spas. This hot tub pillow measures 400 mm long and 140 mm high, and it is also listed under the number CMP 25702-307-000, so you can match it against your existing headrest before ordering.

Compatibility of the Hydrospa oval pillow 3020

This black oval headrest is installed on several spa models made by Hydrospa, as well as on Premium Leisure spas. If your spa has an oval black pillow of the same size, this is the replacement to look at.

Because the pillow is used on several models, the safest way to confirm a match is to compare the part number and the measurements below with the headrest you want to replace.

So wählen Sie die passende Whirlpool-Kopfstütze

Check the following points against your current pillow before ordering:

• Colour and shape: black, oval
• Hydrospa part number: 3020
• CMP part number: 25702-307-000
• Length 400 mm and height 140 mm

If the numbers and measurements agree, the pillow is the correct replacement for your Hydrospa or Premium Leisure spa.

Abmessungen und Befestigungspunkte

The pillow is 400 mm long and 140 mm high. The distance between the centres of the fixing points is 250 mm, so measure the spacing on your current headrest and make sure it is the same.

• Länge: 400 mm
• Höhe: 140 mm
• Distance between fixing point centres: 250 mm

Chlorine and care of your hot tub pillow

Do not use chlorine tablets with this headrest, as the material may degrade prematurely.

Headrests can also react badly when the free chlorine level in your spa is higher than 3 ppm. For that reason it is recommended that you remove the pillows from the spa whenever they are not in use. Following this advice helps you get the most from a replacement pillow.