SloanLED - LiquaLED Jumper Cable 60 cm or 152 cm for SloanLED Lighting – 60 cm - 410117-24-O

SloanLED – LiquaLED Jumper Cable 60 cm or 152 cm for SloanLED Lighting – 60 cm

This SloanLED LiquaLED jumper cable is a replacement extension lead for the SloanLED lighting system in your spa or hot tub. It extends the distance between the controller (CPU) and the individual LiquaLED lights, such as Dual-LED or Quad-LED units. It is offered in two lengths, 60 cm (410117-24-O) and 152 cm (410117-60-O), so you can match it to the gap you need to bridge.

Compatibility with SloanLED LiquaLED lights

The jumper cable is made for SloanLED lighting systems. Its job is to connect the controller with the different LiquaLED lights in the system, for example Dual-LED or the LiquaLED Quad-LED.

If you are unsure whether it suits your lighting setup, contact us with the part number of your current cable or light and we will help you check.

Choosing the right length: 60 cm or 152 cm

The cable is available in two lengths. Pick the one that covers the distance between your controller and the light you want to connect:

• 60 cm – part number 410117-24-O
• 152 cm – part number 410117-60-O

Measure the run in your spa cabinet before ordering, so the cable reaches without being stretched. The 152 cm version is the one to consider when the light sits further from the controller.

Alkatrészszámok és kereszthivatkozások

The SloanLED part numbers are 410117-24-O for the 60 cm cable and 152 cm is 410117-60-O. The Sunrise Spas reference R6053306 is also listed for this jumper cable, which can help if you are comparing it with the number in your spa’s parts list.

When replacing an existing lead, compare the number on your current cable with the numbers above and select the matching length in the options on this page.

What this cable does in your lighting system

A jumper cable does not add a light by itself. It is an extension that links a LiquaLED light to the controller over a greater distance than the standard connection allows. This makes it a useful replacement part when a lead has to be renewed or when a light needs to be positioned further away from the controller within a SloanLED lighting system.