Hayward - Bomba de piscina PWL 0,25 CV amb presa de connexió de 50 mm - 7038741
Hayward Pool Pump PWL 0.25HP 50mm Glue Socket
Delivering a flow rate of 6.5 m³/h at 230 VAC and just 1.6 A draw, this compact 0.25 HP single-speed pump is sized to circulate pools of up to approximately 40 m³ through a full filtration cycle within six hours. The 50 mm glue-socket connection suits standard European pipework, and the all-up weight of 7.9 kg keeps handling and positioning straightforward during installation. Its Noryl impeller and polycarbonate cover combine chemical resistance with long service life, even in demanding outdoor environments.
Motor & materials
The stainless steel shaft and grade-304 stainless steel mechanical seal resist corrosion in salt and chemically treated water alike. The Noryl impeller is dimensionally stable across the pump’s operating temperature range up to 35 °C, helping to maintain consistent hydraulic performance season after season without the warping or fouling that can affect lower-grade thermoplastics.
Muntatge i connexió
The 50 mm solvent-weld (glue socket) ports integrate directly into rigid PVC pipework without the need for compression fittings or unions, reducing potential leak points on permanent installations. At 504 mm in overall length the unit fits neatly into standard plant-room configurations alongside filter vessels and associated valve gear.
Mida per a la vostra piscina
Following Hayward’s own guidance that pool water should complete a full filtration cycle within six hours, the 6.5 m³/h rated flow suits pools up to around 40 m³ — a typical small-to-medium in-ground pool. For larger bodies of water or installations with high head losses from long pipe runs, a higher-output model from the Hayward range should be considered.
Informació addicional
| Marca: | Hayward |
|---|---|
| Model: | PWL 0.25HP |
| Tipus: | Bomba de piscina d'una velocitat |
| Capacitat de la bomba: | 6.5 m³/h |
| Coneixement: | Embot de cola de 50 mm |
| Tensió: | 230 VCA |
| Consum de corrent: | 1.6 A |
| Temperatura màxima de l'aigua: | 35 °C |
| Material de la turbina: | Noryl |
| Material de la coberta: | Policarbonat |
| Material de l'eix / junta: | Acer inoxidable / SS 304 |
| Pes: | 7,9 kg |
Documents
-
Descarrega
Fitxa tècnica del fabricant
268 KiB
-
Descarrega
Manual d'usuari
16 MB
En detall
- 6.5 m³/h flow handles pools up to ~40 m³
- Low 1.6 A draw keeps running costs modest
- Noryl impeller resists chemicals and warping
- SS 304 seal suits salt and chlorinated water
- Compact 7.9 kg body eases plant-room installation
- 50 mm glue socket requires permanent PVC pipework
- 0.25 HP output unsuitable for pools above ~40 m³