Bonfix – Bend 90° Stainless Steel 316L 15mm Press
Purpose-built for 15 mm press systems, this 90° elbow from Bonfix delivers a precise right-angle change of direction in a single tool press — no soldering, no open flame, no hot-work permits required. Manufactured in grade 316L stainless steel, it offers enhanced resistance to chloride-rich environments, making it well suited to pool plant rooms and poolside pipework where aggressive water chemistry is a constant factor.
Material & Corrosion Resistance
Grade 316L stainless steel carries a lower carbon content than standard 316, reducing the risk of sensitisation at weld zones and delivering superior resistance to chlorides and chemically treated water. This makes the fitting a durable long-term choice in pool and spa installations as well as potable water systems, where material integrity over decades is essential.
KIWA / DVGW Approval & Compliance
The fitting holds KIWA and DVGW certification, confirming its suitability for Dutch and German drinking water installations and meeting the rigorous European standards expected by professional installers and inspectors. For pool plant rooms supplied via a potable water feed, this certification provides the compliance documentation that installers and building inspectors require.
Press Connection & Installation
The press-fit end eliminates the need for soldering or threading on site. A standard press tool crimps the fitting permanently onto compatible 15 mm stainless steel pipe, producing a leak-tight, mechanically secure joint in seconds. This significantly reduces installation time on multi-fitting runs and removes fire-risk concerns associated with brazing in enclosed pool plant rooms.
Informació addicional
| Marca: | Bonfix |
|---|---|
| Tipus: | 90° Elbow / Bend |
| Coneixement: | Press (both ends) |
| Diàmetre del tub: | 15 mm |
| Material: | Acer inoxidable 316L |
| Aprovació: | KIWA / DVGW |
| Aplicació: | Potable water, pool plant room pipework |
En detall
- 316L grade offers superior chloride and corrosion resistance
- KIWA/DVGW certified for European compliance and inspections
- Flame-free press connection — no hot-work permit needed
- Fast, repeatable installation reduces labour time on site
- Suitable for pool plant rooms and potable water systems
- Requires a compatible press tool — not hand-installable
- 15 mm size suits small-bore runs only; larger sizes sold separately
