Bonfix – Bend 90° Stainless Steel 316L 22 mm Press
Built for 22 mm press pipework, this full-bore 90° elbow from Bonfix is machined from grade 316L stainless steel — the low-carbon, chloride-resistant alloy preferred wherever pool plant rooms, heat exchangers, and heating circuits demand long-term corrosion protection. Its KIWA/DVGW dual approval confirms suitability for drinking-water and heating installations across the Netherlands, Germany, and beyond.
Press connection & leak-free jointing
The fitting uses a standard press connection, eliminating the need for soldering or hot-work on site. Once pressed with a compatible M-profile press tool, the built-in EPDM O-ring creates a secure, leak-free seal rated for the demands of pressurised pool and heating pipework — a significant time-saving advantage for professional installers working in confined plant-room spaces.
Material quality & corrosion resistance
Grade 316L stainless steel offers superior resistance to chlorides and aggressive water chemistry compared to standard 304 grade, making it well suited to pool heating and heat-exchanger circuits where treated or salt-laden water may be present. The low-carbon composition also reduces the risk of inter-granular corrosion at joints over the fitting’s service life.
Approval & compliance
KIWA/DVGW certification means this fitting has been independently tested and approved for use in potable water and heating systems, satisfying the compliance requirements typically demanded by European installers, building inspectors, and insurance assessors. It fits within the broader Bonfix Press-Inox range, making it straightforward to source matching tees, couplings, and reducers in the same series.
Informació addicional
| Marca: | Bonfix |
|---|---|
| Tipus: | Bend 90° |
| Coneixement: | Press (both ends) |
| Diàmetre del tub: | 22 mm |
| Material: | Acer inoxidable 316L |
| Aprovació: | KIWA / DVGW |
| Seal: | EPDM O-ring |
| Aplicació: | Potable water, heating, pool plant-room pipework |
En detall
- 316L grade resists chlorides and aggressive pool water chemistry
- KIWA/DVGW approved for drinking water and heating systems
- No soldering required — fast, cold press-fit installation
- Part of a complete Bonfix Press-Inox range for easy system building
- Low-carbon 316L minimises inter-granular corrosion risk long-term
- Requires a compatible M-profile press tool to install correctly
- Press fittings must not be repositioned once pressed onto pipe
