Hayward - Pool pump PWL 0.25HP 50mm glue socket - 7038741

Hayward Pool Pump PWL 0.25HP 50mm Glue Socket

Delivering a flow rate of 6.5 m³/h at 230 VAC and just 1.6 A draw, this compact 0.25 HP single-speed pump is sized to circulate pools of up to approximately 40 m³ through a full filtration cycle within six hours. The 50 mm glue-socket connection suits standard European pipework, and the all-up weight of 7.9 kg keeps handling and positioning straightforward during installation. Its Noryl impeller and polycarbonate cover combine chemical resistance with long service life, even in demanding outdoor environments.

Motor & materials

The stainless steel shaft and grade-304 stainless steel mechanical seal resist corrosion in salt and chemically treated water alike. The Noryl impeller is dimensionally stable across the pump’s operating temperature range up to 35 °C, helping to maintain consistent hydraulic performance season after season without the warping or fouling that can affect lower-grade thermoplastics.

Montaggio e collegamento

The 50 mm solvent-weld (glue socket) ports integrate directly into rigid PVC pipework without the need for compression fittings or unions, reducing potential leak points on permanent installations. At 504 mm in overall length the unit fits neatly into standard plant-room configurations alongside filter vessels and associated valve gear.

Dimensionamento in base alla tua piscina

Following Hayward’s own guidance that pool water should complete a full filtration cycle within six hours, the 6.5 m³/h rated flow suits pools up to around 40 m³ — a typical small-to-medium in-ground pool. For larger bodies of water or installations with high head losses from long pipe runs, a higher-output model from the Hayward range should be considered.