DS78TBR Mosiężny wodomierz DN15 3/4" z gwintem zewnętrznym, 16 bar, certyfikat KIWA MNK-N, impulsowy
Wysyłka 1–3 tygodnie
Certyfikowany sklep internetowy
Łatwe zwroty w ciągu 14 dni
Szukasz porady?
DS78TBR Brass Water Meter DN15 — KIWA-Certified Horizontal Single-Jet Meter with Pulse Output
This DN15 single-jet water meter in brass construction is designed for accurate cold-water volumetric measurement in residential, commercial irrigation, and pool-plant installations. The horizontal mounting orientation and compact 165 mm face-to-face length make it straightforward to retrofit into existing pipework. Both ports carry a 3/4 inch male thread (G 3/4″), allowing direct connection to standard female-thread fittings and manifolds without adapters. The meter is sealed to IP54, protecting the register from splash water and dust ingress in exposed plant-room or outdoor-cabinet environments.
Certified to KIWA type MNK-N, the DS78TBR meets European metrological requirements for trade and billing measurement. The built-in pulse option outputs one pulse per 10 litres consumed, enabling straightforward integration with building-management systems, irrigation controllers, dataloggers, or remote-monitoring gateways — no separate pulse transmitter required. The mechanical register displays cumulative volume with a resolution of 0.1 litre, while the hinged protective cover keeps the dial readable and tamper-evident.
Dane techniczne
- Model: DS78TBR
- Średnica nominalna: DN15
- Connection thread: G 3/4 inch male thread, both ports
- Face-to-face length: 165 mm
- Overall body height (centre to top of register): 95 mm
- Średnica tarczy: 120 mm
- Nominal flow rate (Qn): 1.5 m³/h
- Maximum flow rate (Qmax): 3 m³/h
- Maksymalne ciśnienie robocze: 16 barów
- Maksymalna temperatura wody: 50 °C
- Materiał korpusu: mosiądz
- Register resolution: 0.1 litre
- Pulse output: 1 pulse per 10 litres
- Kierunek montażu: poziomy
- Klasa ochrony: IP54
- Certyfikat: KIWA MNK-N
Kompatybilność
The DS78TBR is compatible with any G 3/4 inch female-thread pipework in copper, brass, stainless steel, or plastic (using appropriate adapters). The 10-litre pulse output is compatible with impulse-counting irrigation controllers, energy-management loggers, and smart-home water monitors that accept a volt-free reed-switch or open-collector pulse signal. It is suitable for cold potable water up to 50 °C and pressures up to 16 bar. Not intended for hot-water billing applications above 50 °C or for fluids other than clean cold water.
Informacje dodatkowe
| Marka: | DS78TBR |
|---|---|
| Model: | DS78TBR |
| Certyfikacja: | KIWA MNK-N |
| Średnica nominalna: | DN15 |
| Typ połączenia: | Male thread G 3/4 inch, both ports |
| Długość linii twarzy: | 165 mm |
| Body height (centre to register top): | 95 mm |
| Średnica tarczy: | 120 mm |
| Nominalne natężenie przepływu (Qn): | 1.5 m³/h |
| Maksymalne natężenie przepływu (Qmax): | 3 m³/h |
| Maksymalne ciśnienie robocze: | 16 barów |
| Maximum water temperature: | 50 °C |
| Materiał korpusu: | Mosiądz |
| Treść uchwały: | 0.1 litre |
| Pulse output: | 1 impuls na 10 litrów |
| Kierunek montażu: | Poziomy |
| Klasa ochrony: | IP54 |
| Średni: | Cold potable water |
Szczegóły
- KIWA MNK-N certified — accepted for billing and compliance metering without additional approval
- Integrated pulse output (1 pulse/10 L) eliminates the need for a separate retrofit transmitter
- Compact 165 mm face-to-face length fits standard DN15 meter unions and tight plant-room runs
- IP54 sealed register suits outdoor meter boxes and damp pool-plant environments
- Brass body rated to 16 bar handles high-pressure municipal supply without a pressure reducer
- Horizontal installation only — vertical or inclined mounting is not supported by this model
- Male-threaded ports require female-thread unions or couplings; no push-fit or compression ends included
- Cold-water only up to 50 °C — not suitable for hot-water or heating-circuit measurement
