Waterway - 80-2/4 Two-Speed Spa Pump Motor for Hi-Flo Pumps - PPS-10105

Waterway – 80-2/4 Two-Speed Spa Pump Motor for Hi-Flo Pumps

The EMG 80-2/4 is a two-speed, water-resistant replacement pump motor, made in Italy. It is used by several pump brands, including Waterway, where it is fitted to the Waterway Hi-Flo 2-speed pump. Its separate low and high speed ratings are the key detail to compare when you are replacing a hot tub pump motor.

Compatibility of the EMG 80-2/4 pump motor

This motor is used by several pump brands. Waterway uses it for the Hi-Flo pump, so it is a relevant replacement if your spa has that pump and the motor needs to be changed.

Because the same motor type appears in more than one brand of pump, always compare the motor you are replacing with the details below before ordering. The motor type is a two-speed unit, so it is not intended as a swap for a single-speed motor.

Power and speeds

The EMG 80-2/4 is a two-speed motor, with a separate power rating for each speed:

• Low speed: 0.45 kW
• High speed: 1.48 kW (2.0 HP)

These figures are useful when you want to confirm that a replacement matches the motor currently installed in your spa pump.

Méretek és csatlakozás

Check the size of the new motor against your existing one so that it fits the pump housing and the space around it. The dimensions are:

• Total length: 300 mm
• Szélesség: 180 mm
• Height: 225 mm
• Shaft diameter: 12 mm

The 12 mm shaft diameter is worth measuring on your old motor, as the shaft is the part that connects to the pump.

How to choose the right replacement motor

Start by confirming that your pump is a Waterway Hi-Flo or another pump that uses the EMG 80-2/4 motor. Then compare the following points with your current motor:

• Two-speed operation, with 0.45 kW on low and 1.48 kW on high
• Overall length, width and height
• Shaft diameter of 12 mm

If all of these match, the EMG 80-2/4 is the motor type you are looking for. The motor is water-resistant and made in Italy.