Gecko – TSC-3 / K-3 pezsgőfürdő-billentyűzetfólia fúvógombbal – 9916-100261

Gecko – TSC-3 / K-3 Hot Tub Keypad Overlay with Blower Key

The Gecko 9916-100261 is a self-adhesive replacement overlay for the top surface of a Gecko TSC-3 hot tub keypad, listed as TSC-3 / K-3. It carries four buttons: Pump 1, Pump 2, Blower and Light. A separate version of this overlay is available with a Pump 3 key in place of the Blower key, so check the key layout before you order.

Compatibility with the Gecko TSC-3 / K-3 keypad

This overlay is made for the Gecko TSC-3 hot tub keypad, also referred to as the K-3. It is applied to the top surface of the keypad and is not a complete keypad or control panel in itself.

The Gecko part number for this overlay is 9916-100261. Use this number when you compare it with the overlay on your current spa topside keypad.

Gombok és funkciók

The overlay has four buttons, labelled as follows:

• Pump 1
• Pump 2
• Blower
• Light

If your hot tub has a third pump rather than a blower, you need the other version of this overlay, which has a Pump 3 key instead of the Blower key. Look at the labels on your existing keypad to see which layout you have.

Hogyan válassza ki a megfelelő fóliát

Before ordering, compare the following with your current keypad:

• The keypad model: this overlay is for the TSC-3 / K-3.
• The button labels: Pump 1, Pump 2, Blower and Light.
• The size of the overlay: 105 mm by 40 mm.

If your keypad shows a Pump 3 key where this overlay has a Blower key, choose the Pump 3 version of the overlay instead.

Illeszkedés és méretek

The overlay is self-adhesive and sticks directly onto the top surface of the keypad. It measures 105 mm in length and 40 mm in width.

Because it is only the printed overlay, the keypad itself is not included. Measure the surface of your keypad against these dimensions before removing anything.