Bélésanyagok és burkolatok

Liners and covers for pools and ponds

A welded PVC membrane is the waterproof skin of a pool. It is delivered as a roll, cut to suit the shape of the basin and welded together on site, so the same material works in a rectangular family pool, a free-form garden pool or a lined pond. Here you will find membrane rolls in several widths and lengths, a choice of plain and patterned finishes, and the welding agent used to close and seal the seams.

Membranes are also the usual answer when an older pool needs renovating. Because the sheet is welded rather than fitted as a pre-made bag, it can follow steps, benches, Roman ends and awkward corners, and it can be laid over an existing tiled or rendered shell that has started to leak.

A termékcsalád tartalma

The selection is built around the Elbe programme, with OgenFlex as an alternative, and splits into a few clear families:

• Elbe Basic Line Classic (SGB 150) – plain single-colour membrane in white, black, anthracite, grey and sand, supplied on 25 m rolls.
• Elbe Exclusive Line Elite Motion 3D – textured decorative membrane in finishes such as Black Stone and Grey Rock, supplied on 21 m rolls.
• Elbe Exclusive Line Unique Tile – tile-effect prints including Cyprus Green, Tuscany Sand and Dolomite Grey on 25 m rolls.
• OgenFlex 3D Blue – a patterned blue membrane on 25 m rolls.
• Elbe Basic Line Natural Supra pond liner – sand, light grey and slate grey, intended for ponds and natural swimming ponds.
• Elbe welding agent – 700 g and 1 litre tins for sealing cut edges and seams.

Choosing a roll width and length

Most items are offered in 1.65 m and 2.00 m widths. The width is the practical decision: it determines how many horizontal seams end up on the walls of the pool. For a basin with a wall height up to roughly 1.5 m, a 1.65 m roll will often cover the wall in a single run once the turn into the floor and the fixing allowance at the top are taken into account. Deeper walls, or a pool where you prefer fewer seams across the floor, usually suit the 2.00 m width better.

Before ordering, measure the pool at the actual surface rather than from the original drawing: the perimeter at coping level, the wall height at the shallow and deep ends, the floor length and width, and the depth of any steps or seat. Add an allowance for the overlap at every welded joint and for trimming at the top edge. Roll lengths of 21 m and 25 m mean a single roll often covers a small pool, while larger basins are planned as several lengths run in the same direction so the seams line up tidily.

Colours, finishes and installation materials

Colour changes the apparent water tone more than anything else in the pool. White and sand give a bright, light blue-green look; grey and anthracite produce a darker, more reflective surface; black reads almost as a mirror. Tile-effect and 3D finishes add surface texture and pattern, which helps disguise minor irregularities in the shell underneath and gives steps and shallow areas more visual definition.

Seams are made with hot air or a hot wedge, then the exposed cut edges and detail points are treated with welding agent. Keep a tin on hand for pipe penetrations, skimmer and light surrounds, step nosings and any later repair, since these are the areas where a membrane is most often disturbed. Work on a clean, dry, smooth substrate, and allow for the geotextile or felt underlay and the profiles or fixing strips your pool design calls for.

Liners & covers at PoolParthub.com

Here we list membrane rolls in the widths, lengths and finishes above, covering plain Basic Line colours, decorative Exclusive Line patterns, OgenFlex and Natural Supra pond liner, plus the welding agent used alongside them. Everything is grouped so a width and a roll length can be matched quickly once the pool has been measured.

Pool membranes are kept together with the rest of the spare parts programme so a renovation can be planned in one place: liner, sealing materials and the skimmer, light and inlet fittings that pass through it. Model and type names are given in full on each product so the finish you choose can be matched again for a later extension or repair.