Wellis - Light Grey Spa Headrest for Wellis Hot Tubs - AF00042

Wellis – Light Grey Spa Headrest for Wellis Hot Tubs

The Wellis AF00042 is a light grey spa headrest, sometimes called a hot tub pillow, supplied as a replacement for Wellis hot tubs and spas. It attaches to the shell of the spa using the notches provided and suits the Wellis models listed below, from Tri and Pil to Palermo, Manhattan, Miami family and Fiji.

Compatible Wellis spas for headrest AF00042

This replacement headrest is designed for Wellis hot tubs and spas. The following models are listed for part number AF00042:

• Tri, Pil, Cal, Man and Pal
• Fiesta 1 and Fiesta 2
• Wel, Elbrus 2, Vol and Miaf
• Palermo premium and Palermo deluxe
• Manhattan premium and Manhattan deluxe
• Miami family and Fiji

If your spa is not in this list, do not assume the pillow will fit. Compare it carefully with the headrest you already have.

Fixation et dimensions

The headrest is fixed to the shell of your spa with the notches provided. Before ordering, measure your existing pillow and compare it with the dimensions below:

• Longueur : 320 mm
• Height: 113 mm
• Distance between the centres of the fixing points: 240 mm

The distance between the fixing points is the most useful measurement to check, because it shows whether the new pillow lines up with the existing mounting positions in your spa.

Looking after your spa headrest

Headrests can react badly when the free chlorine level in your spa is higher than 3 ppm. For this reason it is advisable to remove the headrests when they are not in use, particularly if you tend to run your water at a higher chlorine level.

How to choose the right Wellis headrest

Start with the model name of your spa and check that it appears in the compatibility list above. Then confirm the colour: this version is light grey. The Wellis part number for this pillow is AF00042, also shown as Wellis / Phybris AF00042, so use that number when comparing it with your old headrest or your spa documentation.