AstralPool - Fixing Nut and Gasket for Mini Light (Spa Version) - 4403015201

AstralPool – Fixing Nut and Gasket for Mini Light (Spa Version)

This genuine AstralPool spare part kit contains the fixing nut and rubber gasket required to mount and seal the Mini Light embedded spotlight in spa walls. Together, the nut clamps the light body firmly against the spa shell while the gasket provides a watertight seal, preventing leaks around the fitting. It is listed as Position 1 in the official Fluidra exploded-view diagram for the Mini Light Emb. White / Stainless Steel / For Spas (ref. 36647).

Compatibilité

This kit is designed exclusively for the AstralPool Mini Light Emb. White / Stainless Steel / For Spas (parent reference 36647). It is not interchangeable with other Mini Light variants such as the fast-anchoring or prefabricated-pool versions. Always verify your parent light’s reference number before ordering.

Pourquoi l'authenticité est importante

Using an original AstralPool nut and gasket ensures correct thread pitch, proper torque engagement, and a gasket compound rated for continuous immersion in spa water — including conditions with elevated temperatures and sanitiser concentrations. Third-party substitutes may not match these tolerances, risking seal failure or thread damage on the light body.

Installation

Slide the rubber gasket over the light body and position the projector into the spa wall aperture. Feed the cable through the cable duct, then thread the 2″ fixing nut onto the rear of the light body and tighten until the gasket compresses evenly and the unit is held firmly without over-torquing. Leave at least 1.5 m of cable looped inside the spa body to allow future servicing without draining.