SloanLED - UltraBRITE 10-LED Spa Master Light - 701739-SAO

SloanLED – UltraBRITE 10-LED Spa Master Light

The SloanLED UltraBRITE 701739-SAO is a 10-LED LiquaLED spa light with its own integrated controller, so it works as a master light. The same light is listed under Marquis Spa 740-0682 and Sunrise Spas R6053312, which makes it a handy replacement hot tub light if you are matching one of those numbers. Unlike a basic LED, it changes colour on its own once it has power, with no separate controller needed.

How the UltraBRITE 701739-SAO spa light works

This light carries ten LEDs and a built-in controller. Plug it into a 12V socket using the supplied 2-pin AMP plug and it starts cycling through its colours straight away.

To change the colour program, simply switch the light off and on again. Each power cycle moves it on to the next program.

Connecting several lights together

If your spa has more than one light, you can connect several of these units to a LiquaLED controller using LiquaLED cables. When linked this way, the colour changes of every unit stay in synchronisation.

• Stand-alone: plug straight into a 12V socket with the 2-pin AMP plug
• Multi-light: connect to a LiquaLED controller with LiquaLED cables

Especificacions tècniques

• Electrical connection: 12V AC
• Output: 12V DC, 4 wires (RGB)
• Printed circuit board diameter: 40 mm
• Maximum current: 240 mA
• Integrated controller

Check these values against your current light before ordering, particularly the 40 mm board diameter and the connection type.

Choosing the right replacement light

Compare the part number on your existing spa light with the numbers shown on this page. This SloanLED light is listed as 701739-SAO, with the Marquis Spa reference 740-0682 and the Sunrise Spas reference R6053312.

If your current light carries a different number, or you are unsure whether it will suit your spa, check the part number on your existing light before ordering.