Saltar para o conteúdo

Conjunto de fio flutuante Flotide/MEGA XR2 para limpador robótico de piscinas - 7035116

7035116
1-3 semanas
€602,45 IVA incl.
Envio Envio 1-3 semanas
Certificado Certificado loja online
Devoluções fáceis Devoluções fáceis em até 14 dias
Peça sobresselente Procura uma peça?
Vista explodida
Pergunta Precisa de ajuda?
Faça a sua pergunta

Bosta – Flotide/MEGA XR2 Floatable Wire Assembly for Robot Pool Cleaner

This is the genuine replacement floatable wire assembly for the Flotide/MEGA XR2 robotic pool cleaner. The floating cable connects the robot unit to the controller box, supplying power while staying buoyant at the water surface to prevent tangling during cleaning cycles. Keeping this assembly in good condition is essential for safe, uninterrupted robot operation.

Compatibilidade

Designed specifically for the Flotide/MEGA XR2 robotic pool cleaner — a floor, wall, and waterline cleaning robot suitable for all pool types up to 12 × 6 m. Always verify your robot model before ordering, as floating cable assemblies are model-specific and may not interchange with other Flotide/MEGA variants.

Porque o Genuíno Importa

The XR2 operates at 24 V DC with a 4.5 A output current, so the power cable must meet the robot’s exact electrical and buoyancy specifications. A genuine Bosta-sourced assembly ensures the correct wire gauge, connector fit, and floating jacket material — protecting both the robot and the pool user. After approximately every 8 hours of continuous use, the cable should be untwisted before restarting the robot, and a worn or damaged assembly should be replaced promptly.

Instalação

Disconnect the robot and power supply completely before swapping the cable assembly. Route the new floating cable so the controller box sits roughly in the middle of the pool’s long side, at least 3.5 m from the water’s edge. Do not use the cable to pull the robot out of the pool — always lift the unit directly.

Informação adicional

Modelo compatível: Flotide XR2 Robotic Pool Cleaner
Tipo de componente: Floatable Wire Assembly (Floating Power Cable)
Tensão de Funcionamento do Robô: 24 V DC / 4.5 A
Cable Feature: Buoyant floating jacket — stays at water surface
Maintenance Note: Untwist cable after every ~8 hours of continuous use