LX Pump Co. - Complete Wet End for LP200, LP250, WP200-II and WP250-II Spa Pumps - PPS-10072

LX Pump Co. – Complete Wet End for LP200, LP250, WP200-II and WP250-II Spa Pumps

This LX Whirlpool spa pump wet end is a complete replacement unit for the LP200, LP250, WP200-II and WP250-II hot tub pumps. It comes with its volute, impeller, seal, flange and gasket, so the whole hydraulic end can be changed in one go. If you are unsure whether you need the 200/250 or the 300 version, the impeller diameter is the way to tell.

Compatibility with LX Whirlpool LP and WP pumps

This replacement wet end is a spare part for the following LX Whirlpool spa pumps:

• LP200
• LP250
• WP200-II
• WP250-II

It is intended for these 200 and 250 series pumps only, so please check the model of your pump before ordering a new hot tub pump wet end.

How to choose between LP/WP 200 and LP/WP 300

Many spa owners hesitate between the wet end of an LP/WP200 and that of an LP/WP 300. The two cannot be told apart by anything other than the impeller, so the impeller is the part to check.

• LP/WP200 impeller: 107 mm diameter
• LP/WP300 impeller: 117 mm diameter

This page covers the LP/WP200 and 250 range. Measure the impeller of your current wet end before you order, so that you receive the correct replacement.

What is included

The wet end is supplied as a complete assembly. It contains:

• Volute
• Impeller
• Wet end seal
• Flange
• Gasket

Because these items are already part of the assembly, you do not need to source them one by one when replacing the complete unit.

Dimensions

The wet end measures 180 mm in width and 195 mm in height. Compare these figures with your existing unit if you want to be sure before fitting the replacement.