HydroAir - Genesis 900W Spa Air Blower with Pneumatic Control - G90-2AN-S
HydroAir – Genesis 900W Spa Air Blower with Pneumatic Control
The HydroAir Genesis 900W hot tub blower, part number G90-2AN-S, is a replacement spa air blower used in several portable hot tub brands. It comes with an air switch and tubing for pneumatic control, so you only need to connect an air button to operate it.
Compatibility and use of the Genesis 900W blower
This HydroAir Genesis blower is fitted by several portable hot tub brands and is suitable as a replacement in almost any spa. The part number to look for is G90-2AN-S.
Because the blower already has an air switch and tubing, it is controlled pneumatically. You simply connect an air button of your choice, for example:
- a Len Gordon LG15 air button
- a Balboa air button
- a Presair air button
- a Tecmark air button
Cable and plug options
The blower is available pre-wired, either without a plug or with an AMP plug.
If your installation uses a mini J&J plug, choose the AMP plug version and use an adapter from AMP to mini J&J, which is sold separately. Alternatively, you can reuse the cable from your existing pump if it is still in good condition.
Connection and dimensions
The blower is supplied with a union for 32 mm pipe. If your plumbing is different, a 1-inch pipe union can be selected instead.
- Length: 275 mm
- Width: 175 mm
- Height: 180 mm
Check these measurements against the space in your equipment bay before ordering.
Before you fit a new hot tub blower
If your old blower stopped working because water got into it, check that the one-way valve on the air line works correctly before installing the new one. Otherwise water can reach the blower again.
Please note that the carbon brush, also called a motor brush, is a wearing part. It is a graphite bonding agent that conducts the electrical current between stationary and rotating wires inside the motor, and its life expectancy is approximately 1500 hours.
Documentation
The installation instructions for this blower can be downloaded below on this page.
Additional information
| Weight: | 4,00 kg |
|---|---|
| Brand: | HydroAir |
| Product type: | Spa air blower |
| Model: | Genesis 900W |
| Part number: | G90-2AN-S |
| Control: | Pneumatic, with air switch and tubing |
| Cable: | Pre-wired, without plug or with AMP plug |
| Connection: | Union for 32 mm pipe (1-inch optional) |
| Dimensions: | 275 x 175 x 180 mm (L x W x H) |
Documents
-
Download
HydroAir Genesis – Installation instructions
105 KB
In details
- 900W HydroAir Genesis blower in blue
- Air switch and tubing already fitted
- Pre-wired, with or without an AMP plug
- Union for 32 mm pipe, 1-inch union optional
- Air button is not included and must be connected separately
- Mini J&J plug installations need a separate adapter or the existing cable