Gecko - Aeware in.link 12V Hot Tub Light Cable 366 cm - 9920-401022
Shipping 1-3 weeks
Certified online store
Easy returns within 14 days
Looking for advice?
Gecko – Aeware in.link 12V Hot Tub Light Cable 366 cm
The Gecko Aeware in.link 12V light cable, part number 9920-401022, is a replacement hot tub light cable that plugs into Gecko Aeware in.xe and in.xm control systems. It is 366 cm long, which is worth checking against the cable you are replacing. Use it when the original spa light cable on your Gecko in.xe control system or an in.xm system needs to be replaced.
Compatibility with in.xe and in.xm systems
The Gecko in.link 12V light cable is listed for Gecko Aeware in.xe and in.xm control systems. It is a plug-in cable, so it connects to the control system rather than being hard-wired in.
If your spa has a different control system, do not assume that this cable will fit. Compare the details on your existing cable and on your control system with the information on this page before you order.
How to choose the right light cable
The simplest way to find the correct replacement is to match the part number. This cable is sold under the following references:
- Gecko part number: 9920-401022
- Astrel cross-reference: PF9920401022
- Rated voltage in the product name: 12V
If the number printed on your old cable is the same as one of these, you have found the right spa light cable. If it is different, do not guess; check the control system type first.
Length and fitting
The cable measures 366 cm in length. Before ordering, measure the route from the control system to the point where the cable connects in your spa, and allow for any bends and corners along the way. A cable that is too short cannot be extended simply by pulling it tighter.
Because the cable plugs into the control system, switch off the power to the spa before you disconnect the old cable or connect the new one. Follow the installation instructions for the correct procedure.
Documentation
Installation instructions for this Gecko light cable are available. You can download them from the documentation section below on this product page.
Additional information
| Weight: | 0,30 kg |
|---|---|
| Brand: | Gecko |
| Product type: | Light cable |
| Series: | Aeware in.link |
| Voltage: | 12V |
| Compatible systems: | Gecko Aeware in.xe and in.xm |
| Length: | 366 cm |
| Part number: | 9920-401022 |
| Cross-reference: | Astrel PF9920401022 |
Documents
-
Download
Gecko Aeware – Installation instructions
2 MB
In details
- Plug-in 12V light cable for Gecko Aeware in.xe and in.xm systems
- Generous length of 366 cm
- Gecko part number 9920-401022 makes matching easy
- Astrel cross-reference PF9920401022 is available
- Installation instructions can be downloaded
- Only intended for Gecko Aeware in.xe and in.xm control systems
- Fixed length of 366 cm, so measure the run before ordering
