Profec Ultrasonic Water Meter Cast Iron DN65 DIN Flange 16 bar MID Class 2

Profec DN65 Ultrasonic Water Meter — Cast Iron, DIN Flange, MID-Approved

This Profec ultrasonic water meter delivers accurate, non-mechanical flow measurement for DN65 pipework in municipal, industrial, and large-scale irrigation applications. The cast-iron body is finished in a distinctive blue epoxy coating that resists corrosion and is easy to identify in plant rooms or buried installations. With no moving parts in the flow path, the meter is immune to wear-related drift, maintaining Class 2 accuracy across its full operating range from the minimum flow rate of 25 m³/h up to the peak flow rate of 50 m³/h, with a nominal flow rate (Q3) of 40 m³/h.

Connections are made via DIN-standard flanges on both ends, allowing straightforward drop-in replacement on existing DN65 flanged pipework without adapter fittings. The face-to-face installation length is 200 mm, flange-to-flange centre dimension is 250 mm, and the flange bolt-circle diameter is 145 mm on each end. A rated working pressure of 16 bar ensures compatibility with high-pressure mains supply. The IP68-rated electronics housing protects the pulse output module and LCD register against submersion, making the meter suitable for pit or chamber installation in groundwater-prone environments. MID (Measuring Instruments Directive) approval confirms the meter meets EU legal metrology requirements for fiscal and billing use.

Műszaki adatok

• Márka: Profec
• Meter type: Ultrasonic, static (no moving parts)
• Nominal diameter: DN65 (2½ inch)
• Connection type: DIN flange, both ends
• Face-to-face length (L): 200 mm
• Overall installation length: 250 mm
• Flange bolt-circle diameter: 145 mm (each flange)
• Body material: Cast iron with blue epoxy coating
• Nominal flow rate Q3: 40 m³/h
• Minimum flow rate Q1: 25 m³/h
• Peak flow rate Q4: 50 m³/h
• Maximális üzemi nyomás: 16 bar
• Accuracy class: Class 2 (MID R100)
• Approval: MID (Measuring Instruments Directive 2014/32/EU)
• Védelmi osztály: IP68
• Output: Pulse output (terminal block visible on body)
• Display: Integrated LCD register under hinged protective cover
• Body colour: Blue

Kompatibilitás

This meter is dimensionally compatible with DN65 pipework flanged to DIN EN 1092-2 (cast iron) or DIN EN 1092-1 (steel) standards at PN16 rating. The 200 mm face-to-face length and 145 mm bolt-circle geometry match standard DN65 PN16 flange pairs. The pulse output terminal is suitable for connection to data loggers, building management systems, or AMR/AMI remote reading units that accept dry-contact or reed-switch pulse signals — verify pulse value with your data logger documentation before installation. Not suitable for metering fluids other than cold potable water unless separately rated by the manufacturer.