Profec - Hose Tail Adaptor Brass 1½" × 50 mm Male Thread 30 bar - 0411775

Profec Hose Tail Adaptor Brass 1½” × 50 mm Male Thread × Hose Tail 30 bar

Rated to 30 bar working pressure and tolerant of fluid temperatures up to 120 °C, this Profec brass hose tail adaptor transitions a 1½” male thread port to a 50 mm hose tail in a compact 70 mm overall length. The large bore makes it well suited to high-flow pool and pump installations where a secure, leak-free connection between threaded equipment and flexible hose is required.

Thread & Hose Connection

One end carries a 1½” male (external) thread for direct engagement into pump housings, filter tank ports, heat pump manifolds, or flanged valves. The opposite end steps up to a 50 mm hose tail barb, sized for standard large-bore flexible pool and industrial hose secured with a hose clip or clamp. A spanner flat of 52 mm allows the fitting to be torqued firmly without slipping.

Material & Pressure Credentials

Machined from solid brass, the body resists corrosion in chlorinated water, salt water, and mild chemical dosing environments. The 30 bar pressure rating comfortably exceeds typical pool circulation pressures, making this adaptor equally at home on chemical-dosing lines, water-treatment plant, and high-pressure irrigation manifolds where a dependable all-metal fitting is preferred over plastic alternatives.

Tallas y compatibilidad

At 70 mm in length with a 50 mm hose tail outside diameter, the fitting integrates neatly into tight plant-room runs without requiring additional reducers. Profec’s range covers many thread and hose-tail combinations, so always confirm that the 1½” male thread matches the port on your pump or filter before ordering.