Zodiac - Voyager RE 4400 iQ Robotic Pool Cleaner - WR000327

Zodiac – Voyager RE 4400 iQ Robotic Pool Cleaner

The Voyager RE 4400 iQ is an electric robotic pool cleaner for pools up to 12 x 6 m, cleaning the floor, walls and water line. It has dual stage 150/60 µ filtration, an 18 m cable and weighs 8 kg.

Com funciona

The Voyager RE 4400 iQ is independent of your filtration system. It collects debris directly in its own filter canister and only needs to be plugged into the mains through its control unit.

It has three motors and moves on tracks. Its smart sensors and design are intended to give good pool coverage, and it is suited to pools of any shape and all floor types and surfaces.

Cleaning performance

Patented cyclonic suction works together with helix shaped brushes and dual stage progressive filtration to collect debris, including the smallest particles. The cleaning width is 23 cm.

The filter canister holds 4 L. A transparent window and a backlit top access filter make it easier to see debris and to reach the filter.

Control and connectivity

The cleaner can be controlled from the control unit supplied with it or from your smartphone through the iAquaLink® app. The app lets you start and stop a cycle and follow its progress, and the cleaner can be updated through automatic software updates.

App control needs a Wi-Fi network with a signal strong enough where the robot and control unit are used.

Suitable pools and installation

The cleaner is made for in-ground and above-ground pools with rigid walls, and it can clean the floor only or the floor, walls and water line. It is intended for permanently installed pools, not demountable ones.

Connection of the control unit to the mains supply, including the protective device it requires, should be carried out by a qualified installer. Keep the control unit away from the pool edge and out of reach of splashes, following the user manual.

Manteniment

Clean the filter with clean water after each cleaning cycle, before debris dries. A full or clogged filter can reduce performance.

• Disconnect the robot from the power supply before any maintenance.
• Rinse the cleaner with clean water and store it out of direct sun.
• Check the brushes and tracks regularly and replace them when their wear indicators are reached.