Zodiac Vortex 3 Saphir coixinet extern (Ec) — peça de recanvi original - W1881A

Zodiac Vortex 3 Saphir external bearing (Ec) — genuine spare part

This is the genuine Zodiac external bearing (palier extérieur) for the Ec drivetrain assembly used in the Vortex 3 Saphir robotic pool cleaner. Seated at the outer face of each drive axle, it carries the rotational load of the wheel and gear train while the robot traverses pool floors, walls, and waterlines. Without an intact bearing the axle runs metal-on-plastic, accelerating wear across the entire transmission.

Function within the drivetrain

The external bearing acts as the outboard support point for the drive axle, working in tandem with the wheel bearing (palier roue) to distribute radial and lateral forces generated during cleaning cycles. It keeps axle run-out within tolerance, ensuring the 17-tooth and 27-tooth pinion gears mesh cleanly and that the robot maintains straight, predictable travel across all pool surfaces.

Models compatibles

This bearing is a direct-fit part for the Zodiac Vortex 3 Saphir and is also compatible with the wider Vortex family including the Vortex 2, Vortex 3, Vortex 3 4WD, Vortex 4, Vortex 4 4WD, Vortex 205, Vortex 305, Vortex RV and OV series, and the Zodiac Alpha RA/OA iQ range. Always cross-check your robot’s reference number before ordering if you are unsure of your exact variant.

Símptomes que indiquen que cal un reemplaçament

A worn or seized external bearing typically presents as audible grinding or clicking from the wheel assembly, erratic or curved travel where the robot fails to hold a straight line, visible lateral play in the wheel when the robot is lifted clear of the water, or accelerated wear on the pinion gear teeth. Catching bearing failure early prevents collateral damage to the more expensive gear and motor-block components.

Per què són importants les peces genuïnes Zodiac

Genuine Zodiac bearings are manufactured to the exact dimensional tolerances required by the Ec axle housing. Aftermarket alternatives frequently deviate in bore diameter or material hardness, leading to premature failure or improper seating that can crack the housing itself. Using an original part maintains the robot’s warranty status and ensures the drivetrain performs exactly as Zodiac designed it.