Keersi - Curved Hot Tub Headrest with Two Fixing Posts - EVA114C

Keersi – Curved Hot Tub Headrest with Two Fixing Posts

The Keersi EVA114C is a curved hot tub headrest with two fixing posts that slot into the holes provided in your spa shell. It is used by several hot tub brands, including Volition, where it is referenced as 810. If you are looking for a replacement spa headrest, compare the length, height and fixing distance below with your current one before ordering.

EVA114C headrest compatibility

This headrest is used by several hot tub brands, including Volition (reference 810). Keersi lists it under the part number EVA114C.

Because more than one make of hot tub uses this headrest, the safest way to confirm that it is the right one is to compare the reference and the measurements with the headrest you want to replace.

Muntatge i dimensions

The headrest has a curved shape and two fixing posts that fit into the slots provided on your spa shell. As an alternative, you can fit it using ventoses.

• Longitud: 290 mm
• Alçada: 95 mm
• Distància entre els centres dels punts de fixació: 190 mm

Com triar el reposacap adequat per al spa

Before ordering, measure your existing headrest and the spacing of its two fixing points. The distance between the centres of the fixing points on the EVA114C is 190 mm, so a headrest with a different spacing will not match the slots in the same way.

Also check the overall length of 290 mm and the height of 95 mm, and look for the reference EVA114C or, for Volition, 810.

Onderhoud en chlorineniveau

Headrests can react badly when the chlorine level in your spa is too high, meaning above 3 ppm. For this reason it is advisable to remove the headrests when they are not in use.

Keeping an eye on your water treatment will help you get the most out of this spa headrest.