HydroQuip - Circulation Pump or Light Harness with Mini J&J Plug - 30-0250-48C
Livrare 1–3 săptămâni
Certificat magazin online
Retururi ușoare în termen de 14 zile
Ai nevoie de sfat?
HydroQuip – Circulation Pump or Light Harness with Mini J&J Plug
The HydroQuip 30-0250-48C is a replacement hot tub harness that connects either a spa light or a circulation pump to the control system. One end has two wires for the pump or light, while the other end has a mini J&J plug with 2 pins that plugs into the control system.
If your spa has a damaged or missing cord between the control system and the circulation pump or light, this harness is the part to look at.
What this spa harness does
This cord links your hot tub’s control system with a circulation pump or with the spa light. The same harness is used for either job, so it is worth being clear about which component you are reconnecting before you order.
- 2 wires for connecting to the pump or light
- Mini J&J plug with 2 pins for the control system
- Part number HydroQuip 30-0250-48C
Cum alegeți piesa potrivită
Start by looking at the plug on your existing cord. This harness has a mini J&J connector with 2 pins, so the connector on your control system needs to match that style. Check that the number of wires at the pump or light end is also two.
If your old harness is still in place, look for the part number printed on it or on its label and compare it with HydroQuip 30-0250-48C. Comparing the plug, the pin count and the wiring before ordering helps you avoid ordering the wrong item.
Length and fitting
The cable measures approximately 120 cm. Before ordering, measure the route your current cord takes from the control system to the pump or light, so you can be sure that this length is enough for your installation.
Always isolate the power supply to the spa before disconnecting or connecting any cord. Plug the mini J&J connector into the control system, then connect the two wires at the pump or light end.
Ce este inclus
You receive one HydroQuip 30-0250-48C circulation pump or light harness with a mini J&J plug already fitted to one end. No other parts are listed as part of this item.
Informații suplimentare
| Greutate: | 0,30 kg |
|---|---|
| Marcă: | HydroQuip |
| Tipul produsului: | Pump / light harness |
| Număr de referință: | 30-0250-48C |
| Conector: | Mini J&J plug, 2 pins |
| Cabluri: | 2 (pump or light end) |
| Lungimea cablului: | Approx. 120 cm |
| Utilizat pentru: | Circulation pump or spa light |
| Se conectează la: | Hot tub control system |
În detaliu
- Works for either a circulation pump or a spa light
- Mini J&J plug with 2 pins for the control system
- Approximately 120 cm cable length
- Two wires for the pump or light connection
- Only suitable where the control system uses a mini J&J 2-pin connection
- Fixed length of approximately 120 cm
