Treci direct la conținut

Celulă de curgere Hanna Instruments pentru seriile BL12x, HI5x0 și HI98141x (BL120-410)

Hanna Instruments BL120-410
1-2 săptămâni
275,95 € tax inc.
Livrare Livrare 1-2 săptămâni
Certificat Certificat magazin online
Retururi ușoare Retururi ușoare în termen de 14 zile
Întrebare Ai nevoie de sfaturi?
Pune-ți întrebarea

Hanna Instruments flow cell for BL12x, HI5x0 and HI98141x series (BL120-410)

The BL120-410 is a flow cell assembly used with Hanna Instruments BL12x, HI5x0 and HI98141x series controllers to hold the measuring electrodes in a constant, representative sample stream. It sits in a bypass line taken off the main circulation pipework, so probes stay wetted and read stable values without being exposed to the full system flow. It is a standard component in commercial pool and spa water-treatment panels built around Hanna dosing and monitoring equipment.

Compatibilitate

Designed for Hanna Instruments controllers in the BL12x, HI5x0 and HI98141x families. It accepts the standard electrode bodies used with those panels, typically pH, ORP and temperature probes plus a flow or level sensor position. Check the thread and probe diameter of your existing electrodes against the cell before ordering as a replacement for a non-Hanna housing.

Poziția de instalare

Fit the flow cell in a bypass loop between the pressure side and the suction side of the circulation pump, downstream of the filter so the sample is clean. Isolating valves before and after the cell allow probes to be removed for cleaning or calibration without draining the system. Mount the cell vertically so the electrodes remain fully immersed and air pockets can escape.

Durata de viață

The cell body itself is a passive part and lasts for years under normal pool water conditions. Replace it if the housing cracks, if threads or O-ring seats leak, or if scale and chemical attack have made it impossible to seal the probes reliably. Periodic inspection during probe calibration is the easiest way to catch wear early.

Note privind comanda

Supplied as a flow cell assembly only; electrodes, cables and controllers are ordered separately. Sold individually rather than as part of a complete panel kit. Confirm the exact controller model in your installation, as port layout differs between the BL12x, HI5x0 and HI98141x ranges.

Informații suplimentare

Referință SKU: BL120-410
Tipul produsului: Flow cell assembly
Aplicare: Pool and spa water treatment panels
Marcă: Hanna Instruments
Compatible series: BL12x, HI5x0, HI98141x
Montare: Bypass line, vertical orientation
Scope of delivery: Flow cell only, electrodes sold separately

În detaliu

  • Keeps electrodes constantly wetted for stable readings
  • Bypass mounting allows probe removal without draining
  • Direct fit for multiple Hanna controller families
  • Passive component with long service life
  • Electrodes and cables not included
  • Requires bypass line and isolating valves
  • Port layout varies between controller series