Fluidra - Manifold Assembly 140 mm for Ø 2350 Sand Filter

Fluidra – Manifold Assembly 140 mm for Ø 2350 Sand Filter

This is the genuine Fluidra manifold assembly with a 140 mm outlet connection, designed as an internal distribution and collection component for the Fluidra Praga large-format commercial sand filter with a Ø 2,350 mm tank. It directs filtered water efficiently through the filter vessel during normal filtration and supports full bed fluidisation during backwash cycles. Replacing a worn or damaged manifold with an exact OEM part restores correct hydraulic performance and protects the filter media bed.

Compatibilidade

This manifold assembly is engineered specifically for the Fluidra Praga sand filter rated at Ø 2,350 mm tank diameter, 130 m³/h flow rate, 140 mm outlet connection, 1.2 m filter bed depth, and a maximum working pressure of 2.5 bar. It is not interchangeable with the 125 mm or 160 mm outlet variants in the same filter family. Always verify your filter’s outlet diameter and tank size before ordering.

Porque o Genuíno Importa

As a genuine Fluidra OEM part, this manifold assembly is manufactured to exact dimensional tolerances, ensuring a leak-free fit and correct flow distribution across the full filter bed. Non-genuine alternatives may not match the precise geometry of the Praga tank, risking channelling, media loss, or premature failure. Choosing an authentic Fluidra component protects your warranty and ensures long-term reliability in a high-volume commercial filtration system.

Instalação

The manifold assembly is located inside the filter tank and typically requires draining the filter vessel and removing the top or access port before replacement. Due to the large tank diameter and commercial-grade construction, installation by a qualified pool technician is strongly recommended. Ensure all seals and connections are inspected and replaced as needed when fitting this assembly.