Profec - Raccordo a gomito a 90° in PVC-U da 225 mm con attacco a incollaggio, 10 bar, grigio - 0100010

Profec – Elbow 90° PVC-U 225mm Glue Socket 10bar Grey

At 225 mm internal diameter, this is one of the largest metric PVC-U elbows in the Profec range — suited to high-volume commercial pool plant rooms, water treatment installations, and industrial pipework where substantial flow capacity must change direction cleanly. With a 10 bar maximum working pressure and a centre-to-socket-face dimension (Cb) of 233 mm on both legs, it delivers a precise 90° turn while keeping headroom demands predictable during layout planning. The solvent-cement glue socket connection meets EN-ISO 1452-3, ensuring a permanent, leak-free bond when installed with the correct PVC primer and cement.

Costruzione e materiali delle navi

Moulded from unplasticised PVC (PVC-U), the fitting offers excellent resistance to corrosion, chlorinated water, and a broad range of chemicals encountered in pool and water treatment environments. PVC-U is appreciably lighter than metal alternatives, reducing structural load on pipe supports while maintaining dimensional stability over long service life. The grey colour is standard for metric pressure pipework across European installations, making it straightforward to identify and match within existing systems.

Glue Socket Connection & Standards

Both sockets are sized to accept 225 mm OD metric PVC-U pipe conforming to EN-ISO 1452-3, the European standard governing solvent-cement connections for plastic pressure piping. The solvent welding process creates a molecular bond between pipe and fitting, producing a joint that is typically stronger than the pipe wall itself when correctly executed. For large-diameter fittings of this size, a heavy-duty or large-bore solvent cement is recommended to ensure adequate coverage and cure across the wider socket face.

Dimensioni e applicazioni

A 225 mm elbow is characteristic of main distribution headers, plant room manifolds, and large commercial or public pool circulation systems rather than domestic installations. Its substantial bore minimises head loss at the directional change, which is important in high-flow systems where pump efficiency depends on keeping friction losses low. Installers should confirm adequate access and support provisions prior to fitting, as the assembled joint assembly has a significant footprint.