Tartalomra ugrás

Hydro-Pro hőszivattyú, inverteres típus (Xp17Dcsi+ típus) szerelvényrajz és pótalkatrészek

7018548
Tanúsított Tanúsított online áruház
Egyszerű visszaküldés Egyszerű visszaküldés 14 nap
Tegye fel kérdését

Pótalkatrész-lista

Flotide/MEGA – TH1 környezeti hőmérséklet-érzékelő dugaszos csatlakozóval (6×4) – 7020259

€15,95

Flotide/MEGA – TH2 csőhőmérséklet-érzékelő 6×4-es csatlakozóval – 7020260

€12,45

Hydro-Pro - Evaporator Heating Belt 230V 65W 1700mm - 7020273

€56,95

Hydro-Pro – Hőszivattyú ventilátor-motor ZWB378D02B 120 W – 7021812

€414,45

Hydro-Pro - Replacement Fan Blade 554mm × 148mm, 10mm Bore, Anticlockwise - 7021816

€99,45

Flotide/MEGA – Vízálló kijelződoboz inverteres hőszivattyúhoz (Xp05Csie típus) – 7010543

€31,45

Hydro-Pro – Invertoros hőszivattyú LED-kijelzős vezérlő SHHCLEDMM101 – 7020256

€226,95

Flotide/MEGA - LED Display Panel with Wi-Fi for Inverter Heat Pump (WiFi02iMM011) - 7023600

€252,45

Flotide/MEGA – Kompresszor-karter fűtőöv 230 V, 35 W, 390 mm – 7020268

€43,95

Nyomásmérő 0–55 bar R410A – 7010518

€47,45

Flotide/MEGA – Alacsony nyomáskapcsoló 0,1–0,3 MPa (A3/32 hőszivattyú) – 7024791

€21,95

Flotide/MEGA - Low Pressure Switch 0.2–0.35 MPa (Inverter Heat Pump Xp05Csie) - 7024792

€21,95

Flotide/MEGA – Hőszivattyú magasnyomás-kapcsoló 3,6–4,2 MPa – 7024793

€21,95

Flotide/MEGA – TH3 kipufogógáz-hőmérséklet-érzékelő csatlakozóval (6×4) – 7020261

€15,95

Flotide/MEGA – PP csődugó, ½" külső menettel, 10 bar, fekete – 0121241

€3,45

Flotide/MEGA – TH6 vízbeömlési hőmérséklet-érzékelő dugaszolóval (6×4) – 7020263

€15,95

Hydro-Pro - Titanium Heat Exchanger for Inverter 17 Heat Pump (Xp17Dcsi+) - 7021821

€1.110,45

Flotide/MEGA – TH5 vízkimeneti hőmérséklet-érzékelő dugaszolóval (6×4) – 7020262

€15,95

Flotide/MEGA – VH-2 csatlakozóval (9×7 mm) ellátott vízáramlás-kapcsoló – 7020257

Flotide/MEGA – VH-2 csatlakozóval (9×7 mm) ellátott vízáramlás-kapcsoló – 7020257

€100,95

Hydro-Pro – Fővezérlőpanel az Inverter 17 hőszivattyúhoz – 7020761

€824,45

Leírás

Hydro-Pro hőszivattyú inverter (Xp17Dcsi+ típus) robbantott ábra & pótalkatrészek

Ez az oldal tartalmazza a teljes szétszerelési rajzot és az alkatrészlistát (BOM) a Hydro-Pro hőszivattyú, inverteres típus (Xp17Dcsi+ típus), gyári referenciaszám alatt gyártva 7018548. Az ábra a teljes egységet lefedi, a külső burkolópanelektől és a ventilátor-szerelvénytől kezdve a hűtőközeg-körön, a titán hőcserélőn és az inverteres vezérlőelektronikán át. Akár medencetulajdonosként végez rutinszerű karbantartást, akár képzett szakemberként hibát diagnosztizál, a változtatható sebességű inverteres hőszivattyú minden fő alkatrésze itt megtalálható. Ha egyszer végignézi a számozott jelöléseket, néhány percen belül azonosítani tudja a szükséges alkatrészt.

Hogyan lehet a számozott ábra segítségével megtalálni az alkatrészt?

A robbantott ábrán feltüntetett minden jelölőszám közvetlenül megfelel a kép alatti alkatrészlista egy sorának — keresse meg az egység azon területét, amelyen dolgozik, keresse meg a megfelelő számot az ábrán, majd olvassa el a táblázatban a leírást és a cikkszámot. Amint megvan a cikkszám, egyszerűen írja be a keresősávba, vagy adja hozzá közvetlenül a kosarához. Legyen óvatos, ha egy szám több helyen is megjelenik az ábrán: a gyakori rögzítőelemek, kapcsok (például a 7-es pozíció) és tömítőgyűrűk (az 57-es és 58-as pozíciók) egyszerre több helyen is használhatók, ezért rendelés előtt győződjön meg arról, hogy a leírás megfelel az Ön egységén lévő pontos helynek. Fordítson különös figyelmet a következő pozíciókra 66 és 67, which both describe a magnet ring — cross-reference these with the physical fitting on your heat exchanger circuit to confirm which you need. Lettered variants — positions 22a és 22b — are called out separately in the diagram and indicate different LED display board models; read the label on your existing board carefully before selecting. Similarly, positions 44 és 45 are both low pressure switches with different operating ranges, so always check the pressure rating marked on the existing switch before ordering a replacement. If your diagram shows a position with no SKU listed, the part is currently not available as a standalone spare and the unit note will direct you accordingly.

Main replaceable assemblies on the Hydro-Pro Heat Pump Inverter (Type Xp17Dcsi+)

A ventilátoregység sits at the top of the unit and comprises the fan motor bracket (pos. 14), the 120 W fan motor ZWB378D02B (pos. 15, SKU 7021812), and the 554 mm × 148 mm anticlockwise fan blade with a 10 mm centre hole (pos. 16, SKU 7021816); these are the components most commonly disturbed during seasonal servicing. Directly behind the fan sits the elpárologtató (pos. 5), which in cold weather is protected by the 230 V 65 W 1,700 mm evaporator heating belt (pos. 13, SKU 7020273), held in place by its dedicated clip (pos. 12). The hűtőközeg-kör runs from the compressor (pos. 25) — cushioned on damping feet (pos. 28) and kept warm in cold climates by the 230 V 35 W 390 mm compressor heating belt (pos. 27, SKU 7020268) — through the 4-way valve (pos. 50) and electronic expansion valve (pos. 52) to the titán hőcserélő (pos. 59, SKU 7021821), which transfers heat to the pool water. Circuit integrity is monitored by the high pressure switch at 3.6–4.2 MPa (pos. 47, SKU 7024793) and by either of the two low pressure switch variants (pos. 44, SKU 7024791; pos. 45, SKU 7024792). The vízkör connections are made through the water connection sets at positions 60 and 65 (both SKU 7014153) and protected by the water flow switch VH-2 (pos. 63, SKU 7020257). Four temperature sensors — the ambient sensor TH1 (pos. 2, SKU 7020259), pipe sensor TH2 (pos. 8, SKU 7020260), exhaust sensor TH3 (pos. 53, SKU 7020261), water-out sensor TH5 (pos. 61, SKU 7020262), and water-in sensor TH6 (pos. 56, SKU 7020263) — provide the inverter control board with all the readings it needs to modulate compressor speed. The inverter main board (pos. 70, SKU 7020761) lives inside the electric box (pos. 68), while the waterproof display box (pos. 21, SKU 7010543) houses the LED display chosen at the time of manufacture.

A változatok és a csomagméretek közötti választás

The most important variant decision on this model is the LED display board at position 22: the standard inverter display is the SHHCLEDMM101 (pos. 22a, SKU 7020256), while the Wi-Fi-enabled version is the WiFi02iMM011 (pos. 22b, SKU 7023600). Check the part number printed on your existing display board before ordering, as the two boards are not interchangeable. The nyomáskapcsolók at positions 44 and 45 look similar externally but operate across different pressure ranges — 0.1–0.3 MPa and 0.2–0.35 MPa respectively — so always verify the rating stamped on the body of the switch you are replacing. For sealing components such as the O-type sealing ring (pos. 57), the blue rubber ring (pos. 58), and the red rubber ring (pos. 64), confirm the diameter and cross-section against the bore of the fitting before purchasing, as slight dimensional differences will affect the quality of the seal. Where the same SKU appears against two positions — as with the water connection set SKU 7014153 at both positions 60 and 65 — a single SKU covers both locations, so simply order the quantity you require.