CTX - Go Salt pH Salt Chlorinator – 12 g/h - 70278

CTX – Go Salt pH Salt Chlorinator – 12 g/h

The CTX Go Salt pH is a self-cleaning salt chlorinator with integrated pH control (7.0 – 7.8 pH) and an included dosing pump. This model produces 12 g/h of chlorine for pools up to 60 m³ and has a power consumption of 0.4 A.

Hogyan működik a sóelektrolízis

The Go Salt pH is a salt electrolysis system for residential pools. Salt is dissolved in the pool water, and this salty water then passes through the electrolysis cell. Inside the cell, a weak electric current passes through titanium plates (electrodes), which produces free chlorine. The system makes chlorine whenever the pool circulation system (pump and filter) is running.

The electrodes clean themselves automatically, which prevents scale forming on them. The manufacturer gives an electrode life of 8.000 – 10.000 hr. The salt level should be between 5 – 12 g/l, with 5 – 6 g/l recommended.

The maximum pool volume of each model depends on the water temperature. The datasheet lists a lower figure for warmer water, so check it against your pool before choosing a size.

Integrated pH control

As the name suggests, this range includes a built-in pH controller. It works in a pH control range of 7.0 – 7.8 pH. A dosing pump is included with the pH option, and the controller switches it through a dedicated output.

The display shows the water pH and the programmed setpoint. The pH sensor is calibrated automatically using calibration solutions. A PUMP-STOP function is also provided for safer dosing, and its time can be configured. A probe holder for the pH sensor is available as an option.

Control, alarms and connectivity

The front panel shows the production scale as a percentage and has keys to increase or decrease chlorine production. Indicators show the self-cleaning polarity, and a salinity alarm warns of high or low salt levels. A flow alarm is shown by all the LEDs blinking.

• External ORP control
• Cover status input, for production control with an automatic pool cover
• Salinity alarms: high and low
• Transparent cell with parallel inlet and outlet

Telepítés

Installation and electrical connection must be carried out by a qualified installer, following the current electrical and accident prevention regulations. The power supply is 230 V ac 50/60 Hz, and it must not be altered to run on another voltage.

The cell connects to the pipework by gluing PVC Ø 63 mm. The enclosure is ABS with an IP24 protection degree, and the maximum room temperature is 40ºC. The equipment produces heat, so it needs a well-ventilated place with the ventilation openings kept clear and away from flammable materials. It must never be installed where it could be flooded.

The manual also requires the equipment to be earthed and supplied through a residual current device, and a disconnector switch must be fitted for the mains connection.

Karbantartás

The manual covers regular maintenance of the electrolysis cell and calibration of the pH sensor. Calibration can be done in a fast mode or a standard mode. It also includes a maintenance schedule and a troubleshooting guide.

Disconnect the equipment from the mains before replacing any component, and use only spare parts supplied by the manufacturer.