CTX - Go Salt Chlorinator – 12 g/h, 60 m³ Pool - 70277

CTX – Go Salt Chlorinator – 12 g/h, 60 m³ Pool

The CTX Go Salt 12 g/h is a self-cleaning salt chlorinator producing 12 g/h of chlorine for pools up to 60 m³. It runs on 230 V ac 50/60 Hz at 0.4 A, works at a salt level of 5 – 12 g/l and connects by gluing PVC Ø 63 mm.

Hogyan működik a sóelektrolízis

Once the system is installed, salt is dissolved in the pool water. This salty water passes through the electrolysis cell, which contains titanium plates (electrodes). When a weak electrical current is passed through the plates, free chlorine is produced.

The Go Salt makes chlorine whenever the pool circulation system, meaning the pump and filter, is running. The electrodes clean themselves automatically, which prevents scale forming on them.

Choosing the right model

The Go Salt range is designed for residential pools up to 180 m³. Each model has its own chlorine output and maximum pool volume, listed on its product page. In warmer water the pool volume each model can treat is lower, so check the manufacturer’s table before choosing.

All models work at a salinity of 5 – 12 g/l, with 5 – 6 g/l recommended, and use the same Ø 63 mm cell connection.

Control, alarms and connectivity

The range offers practical control inputs and warnings:

• External ORP control
• Cover status input, so chlorine production can be controlled with an automatic cover
• High and low salinity alarms
• Flow alarm, shown by all the LEDs blinking

The cell is transparent, with parallel inlet and outlet, and the enclosure is made of ABS.

Telepítés

Installation and electrical connection must be carried out by a qualified installer, following the manual and the electrical and accident-prevention regulations in force. The power supply is 230 V ac 50/60 Hz and must not be altered to run on a different voltage.

The unit must be earthed and fed through a residual current device as specified in the manual. A disconnector switch is required for the electrical connection. The cell line connects to the pipework by gluing PVC Ø 63 mm.

The power supply gives off heat, so fit it in a well-ventilated place with the vents kept clear and away from flammable materials. Protection degree is IP24, so it must not be installed where flooding can occur.

Karbantartás

Because the electrodes clean themselves, routine care is limited. The manual covers maintenance of the electrolysis cell and the periodic maintenance checks. Disconnect the equipment from the mains before working on any component, and use only spare parts supplied by the manufacturer.