Davey - Kit de solution d'étalonnage pour sondes ProMatic Lifeguard (4 x pH, 3 x ORP, 1 x TDS) - 33133SP

Davey – ProMatic Lifeguard Probe Calibration Solution Kit (4x pH, 3x ORP, 1x TDS)

This genuine Davey spare part (33133SP) is the complete probe calibration solution kit for the Davey ProMatic Lifeguard pool chemistry controller. It contains 4 pH calibration solutions, 3 ORP calibration solutions, and 1 TDS (salinity) calibration solution — everything needed to accurately calibrate all three probe types used by the Lifeguard system. Calibration is essential for ensuring the controller’s readings are precise and that dosing decisions are based on reliable data.

Compatibilité

Ce kit d'étalonnage est conçu pour être utilisé avec le contrôleur Davey ProMatic Lifeguard (série DPLG, modèles européens), qui fonctionne en association avec le chlorateur au sel Davey EcoSalt 2. Il couvre les trois canaux de sonde : pH, ORP (potentiel d'oxydoréduction) et TDS/conductivité (salinité). Si vous possédez un appareil ProMatic Lifeguard et que vous devez le recalibrer après le remplacement d'une sonde, la mise en service saisonnière ou un entretien de routine, ce kit de remplacement est celui qu'il vous faut.

Quand procéder à un réétalonnage

Davey recommends checking probe calibration on a 3-monthly basis as part of preventive maintenance. The probes are consumable components that naturally deteriorate over time — the older they become, the more frequently recalibration is needed, and a full recalibration is required whenever a probe is replaced. The ORP probe should be soaked in its calibration solution for at least 10 minutes before calibrating, while the pH and TDS probes follow a simpler dip procedure guided by the Lifeguard controller’s on-screen menu.

Pourquoi l'authenticité est importante

Using genuine Davey calibration solutions ensures the reference values match the tolerances the ProMatic Lifeguard’s firmware is tuned to, preserving measurement accuracy for pH control, chlorine (ORP) management, and salt-level monitoring. Third-party solutions with different buffer concentrations can introduce calibration errors that affect automatic acid dosing and chlorine production decisions, potentially compromising water quality and equipment protection.