Ersatz-O-Ring für Zodiac-Chlorinator (2 Stück) – R0739000

Zodiac Ersatz-O-Ring-Dichtring für Chlorinator R0739000

The Zodiac replacement chlorinator O-ring sealing ring R0739000 is the original electrode sealing gasket used in Zodiac salt water chlorinators.
These O-rings sit around the cell electrode and ensure a reliable, watertight seal between the electrode and the cell housing, preventing leaks and
protecting the electrical connections in the chlorinator cell.

Hauptmerkmale des Zodiac R0739000 Dichtrings

• Original Zodiac sealing O-ring for salt water chlorinator cells.
• Designed to seal the electrode inside the clear cell housing and prevent water leaks.
• Supplied as a pack of two O-rings for one cell assembly and a spare.
• Made from durable, chemical resistant elastomer suitable for salt water pools.
• Replaces previous Zodiac reference W150031 used on earlier cell models.

Kompatibilität und Anwendungsbereiche

This sealing ring is used on a wide range of Zodiac salt water chlorinators and MagnaPool systems. It is specifically designed for the electrode
seating area and is listed as the electrode sealing O-ring in the spare parts diagrams.

• Zodiac TRi Salzchlorinatoren.
• Zodiac TRi Expert und TRi Expert LS Modelle.
• Zodiac eXO und eXO iQ Salzchlorinatoren.
• Zodiac eXO iQ LS Modelle mit niedrigem Salzgehalt.
• Hydroxinator and Hydroxinator iQ units (including MagnaPool versions).

If the exploded view or parts list for your chlorinator shows “electrode sealing O-ring” with reference R0739000, or if the old ring carries
the same reference, this spare part is the correct replacement.

Technische Details

• Marke: Zodiac.
• Produkttyp: Dichtungs-O-Ring für Elektrode der Chlorzelle.
• Hersteller-Referenz: R0739000.
• Bisherige Referenz: W150031 (ersetzt durch R0739000).
• EAN: 9317545036267.
• Pack contents: 2 sealing O-rings.
• Application area: Seal between electrode and cell housing in Zodiac salt chlorinators.
• Typical medium: Salzwasser aus privaten Poolsystemen.

Wann der O-Ring-Dichtungsring ausgetauscht werden sollte

Over time, O-rings are exposed to temperature changes, chemical products and mechanical pressure from the cell unions. This can lead to flattening,
Verhärtungen oder Risse, die die Wasserdichtheit beeinträchtigen.

• Sichtbare Risse, Einschnitte oder Verformungen am vorhandenen O-Ring.
• Persistent drips or leaks around the electrode end of the cell housing.
• Signs of salt or scale deposits forming at the joint between the cell and electrode connection.
• O-ring has become hard or flattened and no longer provides elastic sealing force.

Replacing the worn O-ring with a new Zodiac R0739000 sealing ring restores the original watertightness of the cell and helps protect both the
Elektrode und die elektronischen Teile des Chlorinators.

Installationsrichtlinien

Fitting the new O-ring is straightforward and can usually be done during routine maintenance or when the electrode is replaced.

• Switch off the filtration pump and isolate the chlorinator from the power supply.
• Close the relevant valves and relieve pressure in the line before opening the cell housing.
• Remove the clear cell from the pipework if necessary and gently slide out the electrode assembly.
• Take off the old O-ring from the electrode or housing, noting its exact position and seating groove.
• Clean the sealing surfaces and remove any scale, dirt or old lubricant residues.
• Fit the new Zodiac R0739000 O-ring in the same groove, ensuring it sits evenly without twisting.
• Reinsert the electrode, reassemble the cell and tighten the unions by hand to compress the seal correctly.
• Restart the filtration system and inspect the cell area closely to confirm that there are no leaks.

Pflege und bewährte Verfahren

Correct handling of the O-ring and cell assembly extends the life of the new seal and your chlorinator cell.

• Avoid using aggressive tools or sharp objects near the O-ring when opening the cell.
• Do not overtighten unions; excessive mechanical stress can damage the seal and the housing.
• If a lubricant is used, choose a silicone based product compatible with pool O-rings and apply only a thin film.
• Inspect the O-ring at the start of each season and replace it preventively if it shows signs of ageing.