Davey - Kit de recanvis per a Silensor SLL400E (generació antiga, sense ranura acanalada) amb eix i rodet - KSLL400

Davey – Kit de servei del motor per a Silensor SLL400E (generació antiga, sense ranura estriada) amb eix i rotor

This is the genuine Davey service motor kit (SLL400E) designed specifically for the original “old generation” Davey Silensor SLL400E pool pump — the variant without a splined shaft groove. The complete kit is supplied with a new shaft and updated impeller, ensuring full compatibility when upgrading the motor assembly on these earlier pump variants. It is the correct replacement solution when the motor of an SLL400E (“-0” suffix model) has failed, lost efficiency, or requires a full motor overhaul.

Compatibilitat

This kit fits the Davey Silensor SLL400E in its original “old generation” configuration (model suffix “-0”), identifiable by the absence of a splined groove on the shaft. It is not intended for current-generation SLL400E pumps with a splined shaft, nor for three-phase SLL4003F variants. The SLL400E is a single-phase, 220/240 V / 50 Hz pump rated at 1760 W (2.4 hp), and this CE-rated motor kit is distributed exclusively through Davey Europe for the European market. Always verify your pump’s generation before ordering.

Què s’Inclou & Per Què Importen l'Eix i el Rodet

Because the internal geometry of the old-generation “-0” motor differs from the current design, Davey specifies that when the motor is replaced on these pumps, the impeller must simultaneously be updated to the new style. Accordingly, this kit is delivered complete with the new-specification shaft and impeller — ensuring correct hydraulic balance, proper clearances, and reliable long-term operation. The service motor assembly covers all primary internal motor components required for a full motor replacement.

Instal·lació

La substitució del motor de servei és un procediment de nivell de taller. Es necessiten les claus de servei Davey Silensor (números de peça 13810SP i 13810-1SP) per treure les femelles de la carcassa, juntament amb eines de premsa de coixinets. La instal·lació ha de ser realitzada per un tècnic qualificat en equips de piscina seguint les instruccions oficials de manteniment Davey Silensor. Assegura't que la bomba estigui completament aïllada de l'alimentació elèctrica abans de començar qualsevol feina.