Treci direct la conținut

Robinet cu bilă din PVC-U, 75 mm, cu racord cu mufă pentru sudare cu solvent, pentru STP, mâner roșu - 7034182

7034182
1–3 săptămâni
106,95 € tax inc.
Livrare Livrare 1–3 săptămâni
Certificat Certificat magazin online
Retururi ușoare Retururi ușoare în termen de 14 zile
Piesă de schimb Căutați o piesă de schimb?
Accesează vederea explodată
Întrebare Ai nevoie de sfaturi?
Pune-ți întrebarea

Bosta – PVC-U Ball Valve 75 mm Solvent-Weld Socket for STP, Red Handle

This genuine Bosta PVC-U two-way ball valve is the OEM flow-control component specified for the Bosta Counter Current System, Type STP. Featuring dual 75 mm solvent-weld (glue socket) ends and a distinctive red lever handle, it provides reliable on/off flow isolation in the high-flow pipework of STP counter-current installations. Its full-bore design minimises pressure drop, keeping the jet stream at full performance.

Compatibilitate

This valve is designed specifically as a replacement or installation component for the Bosta Counter Current System, Type STP (including STP 2200 T, STP 3000 T and STP 4000 T variants). The 75 mm solvent-weld socket ends bond permanently to standard PVC-U pressure pipe of the same outer diameter using PVC solvent cement (sold separately). The red handle colour allows quick visual identification of this valve’s function within a multi-valve installation.

De ce autenticitatea contează

Sourcing a genuine Bosta valve ensures exact dimensional compatibility with STP system pipework and matching pressure ratings. The PTFE ball seat and EPDM O-ring seals are selected to withstand pool water, chlorinated media and the continuous flow demands of a counter-current pump — off-brand substitutes may use inferior seal materials or slightly different socket tolerances that can cause leaks over time. Replacing like-for-like also preserves any installation warranty on the STP system.

Instalare

Installation requires cutting out the existing valve or preparing the pipe run, dry-fitting the valve to confirm alignment, then bonding with PVC-U solvent cement following the cement manufacturer’s cure time before pressurising. Allow the line to depressurise fully before removing an old valve. Professional installation by a qualified pool technician is recommended given the pipe diameter and the importance of a leak-free joint in a counter-current system.

Informații suplimentare

Material: PVC-U (PVC neplastifiat)
Tipul conexiunii: Dual solvent-weld socket (glue socket), 75 mm
Ball Seat / O-Ring: PTFE ball seat; EPDM 70sh O-ring
Presiunea maximă de lucru: 10 bar la 20 °C (la 75 mm)
Temperatură maximă de lucru: 45 °C continuous; 60 °C short-term
Sistem compatibil: Bosta Counter Current System, Type STP