Ga naar de inhoud

PVC-U Ball Valve 75 mm Solvent-Weld Socket for STP, Red Handle - 7034182

7034182
1-3 weken
106,95  Tax Inc.
Verzending Verzending 1-3 weken
Gecertificeerd Gecertificeerd webwinkel
Eenvoudig retourneren Eenvoudig retourneren binnen 14 dagen
Reserveonderdeel Op zoek naar een reserveonderdeel?
Ga naar de exploded view
Vraag Op zoek naar advies?
Stel je vraag

Bosta – PVC-U Ball Valve 75 mm Solvent-Weld Socket for STP, Red Handle

This genuine Bosta PVC-U two-way ball valve is the OEM flow-control component specified for the Bosta Counter Current System, Type STP. Featuring dual 75 mm solvent-weld (glue socket) ends and a distinctive red lever handle, it provides reliable on/off flow isolation in the high-flow pipework of STP counter-current installations. Its full-bore design minimises pressure drop, keeping the jet stream at full performance.

Compatibiliteit

This valve is designed specifically as a replacement or installation component for the Bosta Counter Current System, Type STP (including STP 2200 T, STP 3000 T and STP 4000 T variants). The 75 mm solvent-weld socket ends bond permanently to standard PVC-U pressure pipe of the same outer diameter using PVC solvent cement (sold separately). The red handle colour allows quick visual identification of this valve’s function within a multi-valve installation.

Waarom authenticiteit belangrijk is

Sourcing a genuine Bosta valve ensures exact dimensional compatibility with STP system pipework and matching pressure ratings. The PTFE ball seat and EPDM O-ring seals are selected to withstand pool water, chlorinated media and the continuous flow demands of a counter-current pump — off-brand substitutes may use inferior seal materials or slightly different socket tolerances that can cause leaks over time. Replacing like-for-like also preserves any installation warranty on the STP system.

Installatie

Installation requires cutting out the existing valve or preparing the pipe run, dry-fitting the valve to confirm alignment, then bonding with PVC-U solvent cement following the cement manufacturer’s cure time before pressurising. Allow the line to depressurise fully before removing an old valve. Professional installation by a qualified pool technician is recommended given the pipe diameter and the importance of a leak-free joint in a counter-current system.

Bijkomende informatie

Materiaal: PVC-U (unplasticised PVC)
Connection Type: Dual solvent-weld socket (glue socket), 75 mm
Ball Seat / O-Ring: PTFE ball seat; EPDM 70sh O-ring
Max. Working Pressure: 10 bar at 20 °C (at 75 mm)
Max. Working Temperature: 45 °C continuous; 60 °C short-term
Compatibele systemen: Bosta Counter Current System, Type STP