Saltar para o conteúdo

Davey - Motor de substituição completo StarFlo DSF300CE - 403160

Davey 403160
1-3 semanas
321,45 € imposto inc.
Envio Envio 1-3 semanas
Certificado Certificado loja online
Devoluções fáceis Devoluções fáceis em até 14 dias
Pergunta Procura aconselhamento?
Faça a sua pergunta

Davey – Motor de Substituição Completo StarFlo DSF300CE

This is the genuine Davey complete motor assembly for the StarFlo DSF300CE single-phase pool pump — a 1.5 hp / 1,100 W unit designed for European 220–240 V / 50 Hz installations. It replaces the entire motor unit when the original has burnt out, seized, or failed beyond economical repair, restoring full pump performance without replacing the whole pump.

Compatibilidade

Part 403160 fits the Davey StarFlo DSF300 and DSF300CE exclusively. The CE variant is intended for the European market. It is not interchangeable with motors for other StarFlo models — the DSF150CE, DSF200CE, DSF250CE, and DSF420CE each use a different motor assembly, so always verify your pump’s model label before ordering.

Quando é necessário substituir o motor?

A motor typically needs replacing when there is a burning smell, the motor fails to start, trips its thermal overload repeatedly, or shows signs of winding failure. The StarFlo DSF300CE features a built-in self-resetting thermal overload that protects against overheating damage; if this trips persistently, a full motor inspection is advised. Fitting a genuine replacement motor returns the pump to its original 26 m³/hr maximum flow rate and 18 m maximum head specification.

Por que a autenticidade é importante

Genuine Davey motors are engineered to the exact tolerances of the StarFlo pump housing, ensuring correct shaft alignment with the impeller and mechanical seal. Using a non-genuine motor risks premature seal failure, vibration, and voided warranty coverage on ancillary components. As an authorised Davey parts source, poolparthub.com supplies only authentic Davey spare parts.

Informação adicional

Modelo compatível: Davey StarFlo DSF300 / DSF300CE
Potência de saída: 1.5 hp (1,100 W)
Fonte de alimentação: 220–240 V / 50 Hz, monofásico
Caudal máximo: 26 m³/hr (433 l/min)
Max Head: 18 m

Em detalhe

  • Exact OEM fit for DSF300 / DSF300CE pump housings
  • Restores full 1.5 hp performance to your existing pump
  • Correct 220–240 V / 50 Hz spec for European installations
  • More cost-effective than replacing the entire pump
  • Genuine Davey quality — engineered to original tolerances
  • Fits DSF300/DSF300CE only — not compatible with other StarFlo models
  • Electrical motor replacement should be carried out by a qualified technician