Skip to content

Senninger - Mini Wobbler Full Circle Sprinkler 1.98 mm Nozzle #5 1/2" Male - Beige - 7033120

Senninger 7033120
1-3 weeks
10,45 € tax inc.
Shipping Shipping 1-3 weeks
Certified Certified online store
Easy returns Easy returns within 14 days
Question Looking for advice?
Ask your question

Senninger – Mini Wobbler Full Circle Sprinkler 1.98 mm Nozzle #5 1/2″ Male – Beige

Fitted with a 1.98 mm (#5) white deflector nozzle and operating at 1.03–1.72 bar (15–25 psi), this Senninger Mini Wobbler delivers 0.64–0.84 GPM (approx. 145–190 L/hr) over a coverage diameter of up to 9.5–12 m in full-circle (360°) mode. The low 10° throw angle of the white deflector keeps water close to the canopy, reducing wind drift and evaporative loss — making this the entry-level nozzle recommended by Senninger for consistent startability at minimum pressure.

Wobbler Technology & Distribution Uniformity

Unlike impact or gear-drive sprinklers, the Mini Wobbler relies on a single grooved deflector that simultaneously rotates and wobbles, producing an instantaneous and uniform application pattern across the entire wetted radius in one pass. With only one moving part, there is minimal wear and the design is inherently resistant to clogging and mechanical failure. The result is highly uniform water distribution that closely matches soil infiltration rates, reducing run-off and preserving soil structure.

Nozzle Identification & Interchangeability

The #5 beige nozzle is colour-coded for quick field identification and is interchangeable with other Senninger Mini Wobbler nozzles (sizes #4–#10), allowing flow rates and coverage diameters to be adjusted without replacing the sprinkler body. Senninger warrants that all nozzles maintain their correct orifice size for five years, protecting long-term hydraulic accuracy across the system.

Installation & Connection

The ½” male NPT thread base screws directly onto a standard riser, stake, or Mini Wobbler Riser Adapter. The upright orientation suits solid-set nursery, horticultural, orchard, and frost-protection systems where overhead coverage at riser height is required. A minimum riser height of approximately 0.46 m is recommended to allow the throw streams to develop fully before reaching the crop canopy.

Additional information

Brand: Senninger
Type: Full circle (360°) upright sprinkler
Nozzle size: 1.98 mm (# 5)
Deflector colour: White
Connection: 1/2" male thread (NPT)
Throw angle: 10°
Material: Engineering-grade plastic
Colour: Beige

Documents

In details

Senninger – Mini Wobbler Full Circle Sprinkler 1.98 mm Nozzle #5 1/2″ Male – Beige – 7033120
10,45 €
  • Uniform full-circle distribution with just one moving part
  • Operates reliably at low pressure from 1.03 bar
  • White deflector limits throw angle, reducing wind drift
  • Colour-coded #5 nozzle — interchangeable with full nozzle range
  • Nozzle orifice size warranted accurate for five years
  • Minimum 0.46 m riser height required for full throw development
  • Low-angle white deflector not suited to tall-canopy overhead clearance