Flotide/MEGA Technical Pallet Type Pro V2 exploded view & spare parts

Flotide/MEGA Technical Pallet Type Pro V2 exploded view & spare parts

This page contains the full exploded-view diagram and bill of materials for the Flotide/MEGA Technical Pallet Type Pro V2 (factory reference 7037815), a pre-assembled, all-in-one pool-equipment station designed to house every major hydraulic and treatment component in a single compact unit. The system integrates a sand filter, circulation pump, salt chlorinator, UV-C disinfection unit, water analysis probes, and all associated PVC pipework and fittings on a single pallet, making it a self-contained solution for residential and light-commercial pools. Whether you are a pool owner carrying out routine maintenance or a technician sourcing a replacement component after a service call, the numbered diagram on this page covers every serviceable part of the Pro V2 assembly. Locate your item in the diagram, match its position number to the parts list below, and you will have the correct SKU ready to order within minutes.

How to use the numbered diagram to find your part

Every numbered call-out in the exploded diagram corresponds directly to a row in the parts list beneath it, so start by identifying the area of the pallet where your part is located — for example, the filtration section, the hydraulic pipework run, or the water-treatment and dosing cluster. Once you have narrowed down the area, read the position number printed beside the arrow in the diagram and find that same number in the “Pos.” column of the list; the description and SKU in that row are the part you need. Bear in mind that some components, such as the Profec pipe clamp at position 10 and the bolt saddle at position 26, may appear in more than one location on the pallet because identical hardware is used at multiple points along the pipework — always check the quantity noted in the diagram before ordering, as you may need more than one. The parts list intentionally skips certain position numbers (the sequence jumps from 12 to 19, for instance) because those numbers are reserved for positions that appear on a variant of the diagram or relate to the complete-pallet assembly entry at reference 7037815; this is normal and does not indicate a missing page. Where a component connects different pipe standards — such as the reducer bush at position 23, which steps between 63 mm and 50 mm — confirm both dimensions before ordering, as fitting the wrong size reducer will affect flow and joint integrity. If you are unsure whether a call-out refers to a single item or a grouped set (such as the bolt saddle pack of three at position 26), the description column will state the pack contents clearly. Taking a photograph of the damaged or worn part alongside the diagram before you order is always a sound practice, particularly for plumbing fittings where visual confirmation of the socket type — glue socket or threaded — prevents a wasted journey.

Main replaceable assemblies on the Flotide/MEGA Technical Pallet Type Pro V2

The heart of the Pro V2 is the Flotide/MEGA MFV20 sand filter at position 8, an HDPE vessel rated to 2.8 bar with 63 mm / 2" metric-imperial glue-socket connections; this is the primary filtration stage through which all pool water passes before returning to the basin. Driving the flow is the Hayward RS II VSTD 1.5 HP variable-speed pump at position 9, connected via 63 mm glue-socket pipework, which draws water from the pool and pushes it through the filter and treatment train. Salt chlorination is handled by the Hayward Aquarite + SV LS salt chlorinator at position 6, with its associated Sugarvalley replacement electrolytic cell at position 28 — the cell is the primary consumable in this circuit and should be inspected seasonally. UV-C disinfection is provided by the Blue Lagoon UV-C Tech 75 W unit at position 11, which delivers an additional sanitation barrier independent of salt chlorine output. Water-quality measurement is covered by two probes: the Hayward ORP probe with 3 m cable at position 7 and the Hayward pH probe with 3 m cable at position 27, both of which report back to the control system; chemical correction is then carried out by the Hayward dosing pump at position 29. A Hayward water flow switch at position 25 protects the system by confirming adequate flow before the chlorinator and UV-C unit are permitted to operate. All major components are interconnected with 50 mm Profec PVC-U pressure pipework (position 1, rated 10 bar) using 90° elbows (position 2), 45° elbows (position 5), and T-pieces (position 3), with isolation provided by 50 mm and 63 mm Profec Safe 600 ball valves at positions 4 and 24 respectively. The control cable at position 19 links the electrical components, and Griffon WDF-05 PVC adhesive at position 12 is the specified solvent cement for all glued joints on the installation.

Choosing between variants and pack sizes

The Pro V2 pipework uses two nominal pipe diameters — 50 mm for the main distribution circuit and 63 mm at the pump inlet and filter connections — and the reducer bush at position 23 (63 mm glue spigot × 50 mm glue socket, SKU 0110748) is specifically sized to bridge those two standards; substituting a reducer with different end dimensions will prevent proper solvent-welded joints from forming and could result in leaks. Matching ball valves are supplied for each diameter: the 50 mm Safe 600 valve (position 4, SKU 0112105) and the 63 mm DN50 Safe 600 valve (position 24, SKU 0112106) are physically different items despite the similar descriptions, so confirm the pipe diameter at the isolation point before ordering. The bolt saddle at position 26 (SKU 0120548) is supplied as a pack of three and provides ½" female-threaded branch outlets on 50 mm pipework; if only one saddle has failed, you will still receive a pack of three — check whether the spares are worth holding in stock. For the pipe clamps at position 20 and the support blocks at position 20 (SKU 0100525), ensure you specify the 50 mm size, as clamp-type fittings are available in multiple diameters and the wrong size will not grip the pipe securely. Finally, when ordering the Griffon WDF-05 adhesive at position 12, note that this is the 250 ml tin; for a full pallet installation or re-pipe, a single tin may be sufficient, but larger jobs may require additional tins ordered separately.