Profec-manometer, gevuld met glycerine, onderaansluiting 1/4" BSP, 0–10 bar
Verzending 1-3 weken
Gecertificeerd webwinkel
Eenvoudig retourneren binnen 14 dagen
Op zoek naar advies?
Profec Glycerin-Filled Pressure Gauge — Bottom Connection, 1/4″ Male BSP, 0–10 bar
This Profec glycerin-filled pressure gauge provides stable, easy-to-read pressure monitoring for pool filtration systems, irrigation networks, and greenhouse drip or sprinkler lines. The glycerine fill dampens needle vibration caused by pump pulsation or water hammer, extending gauge life and improving reading accuracy under dynamic flow conditions. The brass male 1/4″ BSP bottom connection threads directly into standard gauge ports on filters, pressure regulators, and manifolds.
The dial face features a clear 0–10 bar scale with a green safe-zone arc (approximately 1–3 bar) and a dual-needle indicator, allowing operators to set and verify target operating pressure at a glance. The black steel case with a flush bezel protects the internal Bourdon tube mechanism from knocks and UV exposure, making it suitable for outdoor and greenhouse installations. Two front-face screws allow the dial to be recalibrated or serviced without removing the gauge from the line.
Technische gegevens
- Merk: Profec
- Connection position: Bottom (radial / side of body)
- Aansluitingstype: Buitendraad 1/4″ BSP
- Drukbereik: 0–10 bar
- Dial display range visible on face: 0–4 bar primary scale (full range 0–10 bar)
- Fill medium: Glycerin (glycerine-filled)
- Case material: Steel, black lacquered
- Materiaal van de aansluiting: Messing
- Dial diameter: approx. 63 mm (standard Class 63 gauge)
- Maateenheid: bar
- Safe-zone indicator: Green arc on dial face
Compatibiliteit
Suitable for installation on pool sand filters, cartridge filter housings, irrigation pressure regulators, drip-line manifolds, and water-supply booster systems fitted with a 1/4″ BSP female gauge port. Compatible with water, glycol solutions, and non-aggressive liquids compatible with brass and steel internals. Not suitable for oxygen, acetylene, or strongly oxidising media.
Bijkomende informatie
| Merk: | Profec |
|---|---|
| Aansluitpositie: | Onder (radiaal) |
| Verbindingstype: | Buitenschroefdraad 1/4 inch BSP |
| Schroefdraadmaat: | 1/4 inch BSP (male) |
| Drukbereik: | 0–10 bar |
| Vulmedium: | Glycerine |
| Diameter van de wijzerplaat: | 63 mm |
| Materiaal van de behuizing: | Staal, zwart gelakt |
| Materiaal van de aansluiting: | Messing |
| Maateenheid: | bar |
| Indicator veilige zone: | Groene boog, ca. 1–3 bar |
| Needle type: | Dual pointer with red indicator needle |
| Nauwkeurigheidsklasse manometer: | Class 2.5 (standard for this type) |
| Compatibiliteit met medium: | Water, glycol solutions, non-aggressive liquids |
| Montage: | Bottom connection, panel or inline |
Documenten
-
Downloaden
bevo-7033299-7033298M_info_datasheet_en_es
327 KB
In detail
- Glycerin fill suppresses needle flutter from pump pulsation for accurate, stable readings
- Green safe-zone arc on dial gives instant visual confirmation of correct operating pressure
- Standard 1/4" BSP male bottom connection fits the vast majority of filter and regulator gauge ports
- Brass connection stub resists corrosion in wet pool and irrigation environments
- Front-accessible calibration screws allow on-site zero adjustment without line removal
- Bottom-connection orientation only — not interchangeable with back-entry gauge ports without an elbow adaptor
- Glycerin fill can leak if the case seal is damaged, requiring gauge replacement rather than repair
- Steel case requires periodic inspection in highly corrosive or salt-laden environments to prevent rust
