Profec - PE100-elektrofusie-mof 50 mm SDR11 16 bar DVGW - 7025459

Profec PE100 Electrofusion Socket 50mm SDR11 16 bar DVGW

Rated to 16 bar for water and 10 bar for gas, this 50 mm PE100 electrofusion socket joins SDR11 polyethylene pipework with a permanent, fully welded bond — well suited to pool plant rooms, underground supply lines, and pressurised irrigation circuits. Welding is performed at 24VAC via the integral 4 mm electrical connector, making it compatible with standard electrofusion controllers. DVGW approval confirms compliance with the rigorous German certification scheme widely recognised across Europe.

Fusion joint integrity

The electrofusion process melts the inner wall of the socket and the outer surface of the PE pipe simultaneously, producing a homogeneous, leak-free joint with no mechanical seals to degrade over time. A built-in welding indicator and barcode reader support process verification and full traceability back through production records, giving installers documented confidence in each joint.

Material & pressure class

Manufactured from high-density PE100 polyethylene in black — UV-stable and resistant to the chemical conditions typical of pool plant pipework, chlorinated water, and buried installations. The SDR11 wall-thickness classification delivers 16 bar working pressure on water duty, making the 50 mm size appropriate for the main supply and return pipework on commercial and larger domestic pools, as well as pressurised filtration loops.

DVGW certification & compatibility

Full DVGW approval means this fitting meets the stringent German technical standards for both water and gas pipework, accepted by specifiers and authorities across the EU. The 50 mm diameter mates directly with standard SDR11 PE100 pipe of the same nominal size; always ensure the mating pipe surface is scraped, cleaned, and clamped before energising the controller to achieve a void-free weld.