Fascette per tubi in PVC Maytronics Dolphin Supreme M5 Bio (confezione da 10) - 9991216-ASSY

Maytronics Dolphin Supreme M5 Bio PVC hose clips (pack of 10)

This is a genuine Maytronics pack of ten replacement hose clips designed specifically for the Bio PVC hose system used on the Dolphin Supreme M5 Bio PVC robotic pool cleaner. These small but critical fasteners secure the flexible Bio hose sections to their respective ports and fittings on the robot body, maintaining a leak-free hydraulic circuit that is essential for consistent suction and debris pick-up.

Funzione e scopo

The hose clips clamp the Bio PVC hose firmly onto inlet and outlet connectors within the robot’s hydraulic circuit. A loose or cracked clip allows the hose to slip or weep under pump pressure, immediately reducing suction at the brush head and degrading cleaning coverage across the pool floor and walls. Replacing a failed clip restores full hydraulic integrity without the need to replace the entire hose assembly.

Compatibilità

These clips are the correct factory-specified fastener for the Maytronics Dolphin Supreme M5 Bio PVC model. Always verify your robot’s model designation before ordering, as clip diameter and retention tab geometry vary between Dolphin platforms — fitting an incorrect clip can result in hose ejection under operating pressure.

Signs that the clips need replacing

Inspect the clips if you notice reduced suction, a visible gap between the hose end and its port, audible water bypass inside the unit, or if a clip is visibly cracked, distorted or missing its retention tab entirely. Because chlorinated pool water degrades plastics over time, clips should also be checked as a precaution at the start of each season.

Perché è importante utilizzare ricambi originali Maytronics

Genuine Maytronics clips are moulded to the exact bore diameter and wall profile of the Bio PVC hose, ensuring a consistent clamping force without over-stressing the hose material. Aftermarket substitutes are frequently undersized or oversized, leading to either slippage or hose deformation. The pack-of-ten quantity allows you to replace all clips on the robot in a single service event, or to stock spares for future maintenance without repeated ordering.