Norsup hőszivattyú-inverter, Silent-Pro típus (13-as típus) robbantott ábra és pótalkatrészek

Norsup Heat Pump Inverter Silent-Pro (Type 13) exploded view & spare parts

This page covers the complete exploded-view diagram and numbered bill of materials for the Norsup Heat Pump Inverter Silent-Pro, Type 13 — factory reference 7031953. The Silent-Pro Type 13 is a full inverter heat pump fitted with a rotary compressor and uses R32 refrigerant. Its double-side airflow design keeps operating noise exceptionally low, and a Wi-Fi module is included as standard. The diagram maps every serviceable component across the chassis, refrigerant circuit, airflow section, and electrical enclosure, so you can identify your part and locate the correct SKU in a matter of minutes.

Hogyan lehet a számozott ábra segítségével megtalálni az alkatrészt?

Every call-out number printed on the exploded-view diagram corresponds directly to a numbered row in the parts list below the image — start by locating the area of the unit where the fault or wear has occurred (for example, the refrigerant circuit, the electrical enclosure, or the airflow section), then trace the relevant component to its position number. Once you have the position number, find the matching row in the bill of materials and note the SKU; that SKU is what you add to your basket. Bear in mind that some position numbers can appear in more than one location on the diagram — positions 14, 15, and 16 are all described as “Wind deflector” and position 30 and 36 are both described as “Over wire sheath”; in each case, check the diagram callout carefully to confirm you are ordering the component from the correct area of the unit. Not every position has a purchasable SKU: where the SKU column is blank, that part is either a structural element supplied only as part of a larger assembly or is not currently available as a standalone item. If you are unsure whether a blank-SKU part is available, contact us before ordering so we can advise on the correct course of action.

Main replaceable assemblies on the Norsup Silent-Pro (Type 13)

The refrigerant circuit is the heart of the Silent-Pro and contains several individually serviceable components. Position 3 is the titán hőcserélő (SKU 7034048), the water-side component through which pool water passes to absorb heat; the titanium condenser is resistant to salt and chlorine. Position 8 is the bordás hőcserélő, the air-side coil that extracts ambient heat, and position 22 is the 4-utas szelep (SKU 7034054), which reverses the refrigerant flow to enable the automatic heating and cooling modes. The EEV at position 23 (SKU 7034055) is the electronic expansion valve that regulates refrigerant flow for variable-capacity inverter operation, while the nyomáskapcsoló (24. poz., SKU 7034056) és alacsony nyomású kapcsoló (pos. 25, SKU 7034057) are the safety sensors that protect the compressor from out-of-range operating pressures. The airflow section is served by the fan motor at position 12 (SKU 7034049) and the ventilátorlapát at position 13 (SKU 7034050); a low-noise variable fan motor is a key feature of the Silent-Pro design. In the electrical enclosure you will find the inverteres hajtásmodul at position 35 (SKU 7034062), which controls compressor speed, and the CP203 felhasználói felület at position 18 (SKU 7034052), the full-colour touchscreen panel through which the unit is operated and monitored. The waterproof box (poz. 17, cikkszám: 7034051), reactor (poz. 20, cikkszám: 7034053), 5-pólusú kábelezési alaplap (pos. 31, SKU 7034060), and vízáramlás-kapcsoló (pos. 29, SKU 7034059) complete the list of individually stocked electrical and control components. The needle valve at position 27 (SKU 7034058) is the service port valve used during refrigerant maintenance.

A változatok és a csomagméretek közötti választás

The Silent-Pro Type 13 bill of materials does not carry lettered sub-variants (such as “10a / 10b”) for any position, so you do not need to cross-reference a letter suffix when ordering. However, three positions — 14, 15, and 16 — share the same “Wind deflector” description; these are distinct physical panels fitted in different locations around the fan outlet, so consult the diagram to confirm exactly which deflector position you need before ordering. Similarly, positions 30 and 36 are both listed as “Over wire sheath” and serve different cable runs within the unit, so again the diagram callout is your definitive guide. Where a part carries a specific SKU, that SKU refers to the exact component as fitted to the Type 13; do not substitute parts from other models in the Silent-Pro range (such as the Type 17 or Type 28) as differences in refrigerant capacity, fan size, and electrical ratings mean that components are not necessarily interchangeable across output sizes.