Aller au contenu

Davey - Regul'Matic Pipe Saddle Clamp 63 mm - 5448REG

Davey 5448REG
1 à 3 semaines
16,95 € impôts inc.
Expédition Expédition 1 à 3 semaines
Certifié Certifié boutique en ligne
Retours faciles Retours faciles dans les 14 jours
Question Cherchez-vous des conseils ?
Posez votre question

Davey – Regul’Matic Pipe Saddle Clamp 63 mm

This genuine Davey spare part is a pipe saddle clamp (pipe tap clamp) designed for 63 mm pipework and used in the installation of the Davey Regul’Matic salt chlorination controller system. It wraps around an existing pressurised pool pipe, providing a secure, leak-free tapped mounting point through which the Redox or pH probe assembly is fitted. It is the foundation component that anchors the probe in the water flow path so the Regul’Matic can accurately measure and regulate sanitiser levels.

Compatibilité

This saddle clamp is a dedicated spare part for the Davey Regul’Matic automatic pool water treatment controller. It is sized for 63 mm (outside diameter) rigid pool pipework — a standard pipe diameter in European pool installations. If your existing plumbing runs 63 mm pipe and you are installing or reinstalling a Regul’Matic probe assembly, this is the correct clamp. Always verify your pipe diameter before ordering, as Davey also offers saddle clamps in other sizes.

Son rôle et quand le remplacer

The saddle clamp is fitted permanently to the pipe during initial Regul’Matic installation: a hole is drilled in the pipe, the clamp is bonded around it, and the probe housing is threaded in through the clamp outlet. Replacement is typically needed if the clamp cracks, leaks, is damaged during maintenance, or when a Regul’Matic system is being relocated to a different pipe run. Using the genuine Davey part ensures a pressure-tight seal and the correct thread engagement for the Davey probe fitting.

Pourquoi l'authenticité est importante

The Davey Regul’Matic system is engineered as a matched assembly of controller, probe, and pipe fittings. Using a genuine Davey saddle clamp guarantees dimensional compatibility with the probe body and housing supplied with the Regul’Matic, maintaining a watertight connection and reliable probe readings. Off-brand clamps may not match the thread or sealing geometry, risking leaks or inaccurate chlorine regulation.

Informations complémentaires

Système compatible : Davey Regul'Matic salt chlorination controller
Diamètre du tuyau : 63 mm
Type de pièce : Pipe saddle clamp (pipe tap clamp)
Utilisation : Probe assembly mounting on pressurised pool pipework

En détail

  • Pièce d'origine Davey — compatibilité garantie
  • Sized for standard 63 mm pool pipework
  • Creates secure, leak-free probe mounting point
  • Essential for correct Regul'Matic probe installation
  • Durable construction for permanent in-line use
  • Fits 63 mm pipe only — check diameter before ordering
  • Permanent installation; pipe drilling required by a professional